RUD VLBS-U-LT Instructions Manual

Hide thumbs

page of 6

/ 6
Bookmarks

Quick Links

Download this manual

> VLBS-U-LT <

(for low temperatures)

Safety instructions

This safety instruction/declaration of Conformity must be kept for

the entire time usage time and forwarded with the product.

- Translation of the Original instructions -

RUD Ketten

Rieger & Dietz GmbH u. Co. KG

D-73428 Aalen

Tel. +49 7361 504-1370

Fax +49 7361 504-1171

www.rud.com

sling@rud.com

EG-Konformitätserklärung

entsprechend der EG-Maschinenrichtlinie 2006/42/EG, Anhang II A und ihren Änderungen

RUD Ketten

Hersteller:

Rieger & Dietz GmbH u. Co. KG

Friedensinsel

73432 Aalen

Hiermit erklären wir, dass die nachfolgend bezeichnete Maschine aufgrund ihrer Konzipie-

rung und Bauart, sowie in der von uns in Verkehr gebrachten Ausführung, den grundle-

genden Sicherheits- und Gesundheitsanforderungen der EG-Maschinenrichtlinie

2006/42/EG sowie den unten aufgeführten harmonisierten und nationalen Normen sowie

technischen Spezifikationen entspricht.

Bei einer nicht mit uns abgestimmten Änderung der Maschine verliert diese Erklärung ihre

Gültigkeit.

_____________________________________________

Produktbezeichnung:

Lastbock VLBS-LT

Folgende harmonisierten Normen wurden angewandt:

_________________

DIN EN 1677-1 : 2009-03

_________________

Folgende nationalen Normen und technische Spezifikationen wurden außerdem angewandt:

_________________

BGR 500, KAP2.8 : 2008-04

_________________

Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person:

Michael Betzler, RUD Ketten, 73432 Aalen

_____________________________________________

Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)

Aalen, den 26.09.2016

Name, Funktion und Unterschrift Verantwortlicher

_________________

DIN EN ISO 12100 : 2011-03

_________________

Load ring - for welding

for low temperatures

VLBS-U-LT

EC-Declaration of conformity

According to the EC-Machinery Directive 2006/42/EC, annex II A and amendments

RUD Ketten

Manufacturer:

Rieger & Dietz GmbH u. Co. KG

Friedensinsel

73432 Aalen

We hereby declare that the equipment sold by us because of its design and construction,

as mentioned below, corresponds to the appropriate, basic requirements of safety and

health of the corresponding EC-Machinery Directive 2006/42/EC as well as to the below

mentioned harmonized and national norms as well as technical specifications.

In case of any modification of the equipment, not being agreed upon with us, this declara-

tion becomes invalid.

Product name:

_____________________________________________

Load ring VLBS-LT

The following harmonized norms were applied:

_________________

DIN EN 1677-1 : 2009-03

_________________

The following national norms and technical specifications were applied:

_________________

BGR 500, KAP2.8 : 2008-04

_________________

Authorized person for the configuration of the declaration documents:

Michael Betzler, RUD Ketten, 73432 Aalen

_____________________________________________

Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB)

Aalen, den 26.09.2016

Name, function and signature of the responsible person

_________________

DIN EN ISO 12100 : 2011-03

_________________

VLBS-U-LT

Need help?

Do you have a question about the VLBS-U-LT and is the answer not in the manual?

Questions and answers

Summary of Contents for RUD VLBS-U-LT

Page 1 _________________ _________________ _________________ _________________ Für die Zusammenstellung der Konformitätsdokumentation bevollmächtigte Person: Authorized person for the configuration of the declaration documents: Michael Betzler, RUD Ketten, 73432 Aalen Michael Betzler, RUD Ketten, 73432 Aalen _____________________________________________ _____________________________________________ Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Dr.-Ing. Arne Kriegsmann,(Prokurist/QMB) Aalen, den 26.09.2016...
Page 2: Safety Instructions
Intended use CONTENT Safety instructions • The RUD VLBS-U-LT lifting point must only be used for the assembly at loads or lifting means. Intended use • The VLBS-U-LT is for the attaching of loads. Assembly and user instruction General information ..........2 •...
Page 3 Determine the working load limit of each individual Type size length volume RUD lifting point for symmetrical and unsymme- VLBS-U-LT 2.5 t 2 x 40 mm approx. 2.6 cm³ HV 7 + a 3 trical loading according to the following physical 2 x 46 mm approx.
Page 4 3.4 Hints for the usage HINT • Take a look on a regular basis before each use If the VLBS-U-LT is/was used as a lashing (f.e. by the rigging person) on the whole lifting point, with a force higher than the WLL, it point (tight fit,strong corrosion, cracks at load must not be used as a lifting point afterwards.
Page 5 2.5 t 2.5 t 3.5 t 2.5 t 2.5 t 5.25 t 3.75 t 2.5 t VLBS-U-LT 2.5 t 5500 lbs 5500 lbs 11000 lbs 11000 lbs 7700 lbs 5500 lbs 5500 lbs 11550 lbs 8250 lbs 5500 lbs 5.6 t...
Page 6 [mm] [mm] [mm] packungs- Bestell-Nr. [Stk.] einheit /packing komplett unit Ref.-No. [Stück/piece] complete VLBS-U-LT 2,5 t 2,5 t 0,5 kg  VLBS-U-LT 2,5 t 2,5 t 0,53 kg 7903522 VLBS-U-LT 4 t 0,8 kg 7903400 VLBS-U-LT 6,7 t 6,7 t...

RUD VLBS-U-LT Instructions Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for RUD VLBS-U-LT

Summary of Contents for RUD VLBS-U-LT

Page 2: Safety Instructions