RUD ICE-VSK-CURT User Instruction

RUD ICE-VSK-CURT User Instruction

Lashing chains in quality grade 12-ice

Advertisement

Quick Links

Lashing chains in quality grade 12-ICE
ICE-VSK-CURT
ICE lashing chain combinations
must only be used for lashing.
User instruction
This safety instruction / declaration of the manufacturer
has to be kept on file for the whole lifetime
of the product and forwarded with the product.
Translation of the original user instruction
Declaration of the manufacturer
We hereby declare (supported by certification as per
ISO 9001) that the equipment, as mentioned below,
corresponds to the appropriate, basic requirements of
safety and health of the corresponding EU regulation in
the design as it is sold by us because of its design and
construction. In case of any modification of the equipment,
not being agreed upon with us, this declaration becomes
invalid. Furthermore, this declaration will become invalid
if the equipment is not used according to the prescriptions
mentioned in the manual and if the necessary examina-
tions are not carried out regularly as per EN 12195.
Designation of the equipment:
Lashing chain
Type:
ICE-VSK-CURT
Manufacturer's sign:
RUD Ketten
Rieger & Dietz GmbH u. Co. KG
D-73432 Aalen
Tel. +49 7361 504-1370
www.rud.com
sling@rud.com
Hint for the change of EN 12195-1:2003:
The EN 12195-1:2011 is contradictory to
the results of many academic and by prac-
tical confirmed tests. The status of an ac-
cepted technical regulation (acc. to §22,
Abs. 1 StVO) is doubtable (and cur-
rently not confirmed by case law).
To guarantee a sufficiant safety level, the fol-
lowing statements refer to the DIN EN 12195-
1:2004 resp. to the VDI 2700 ff.
Herstellererklärung
Hiermit erklären wir (unterstützt durch die Zertifizierung
nach ISO 9001), dass die nachfolgend bezeichnete
Ausrüstung aufgrund ihrer Konzipierung und Bauart,
sowie der von uns in Verkehr gebrachten Ausführung,
den einschlägigen grundlegenden Sicherheits- und Ge-
sundheitsanforderungen der betreffenden europäischen
Norm EN 12195-Teil 3 entspricht. Bei einer nicht mit uns
abgestimmten Änderung der Ausrüstung verliert diese Er-
klärung ihre Gültigkeit. Weiterhin verliert diese Erklärung
ihre Gültigkeit, wenn die Ausrüstung nicht entsprechend
den in der Betriebsanleitung aufgezeigten bestimmungs-
mäßigen Fällen eingesetzt wird und die regelmäßig durch-
zuführenden Überprüfungen nicht vorgenommen werden.
Bezeichnung der Ausrüstung:
Zurrkette
ICE-VSK-CURT
Type:
Herstellerzeichen:
EN
ICE lashing Chain-Classic
ICE lashing Chain-Ergo
ICE-VSK CURT
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ICE-VSK-CURT and is the answer not in the manual?

Questions and answers

Summary of Contents for RUD ICE-VSK-CURT

  • Page 1 Lashing chains in quality grade 12-ICE ICE-VSK-CURT ICE lashing chain combinations must only be used for lashing. User instruction ICE lashing Chain-Classic This safety instruction / declaration of the manufacturer has to be kept on file for the whole lifetime of the product and forwarded with the product.
  • Page 2: Safety Instructions

    Calculate the number of lashing chains according to EN 12195 and VDI 2700 or use the RUD lashing card. Safety instructions 3.2 Sliding coefficient of friction (µ) acc. VDI 2700-2 ATTENTION...
  • Page 3: Table Of Contents

    3.3 Which ICE lashing chain for which load? Diagonal lashing for round steel link chains of quality grade 12 - Grade 120 Chain type Max. weight in metric tons Lashing (Horizontal angle ß: 20°-45° capacity and use of 2 lashing chains for each direction) [daN] α: 0°-30°...
  • Page 4: Chain Type

    Overview of ICE lashing chain types 5.1 ICE-VSK-CURT-IVH (vertical and direct lashing) - Ratched spindle tensioner Chain Type Permitted Tensioning device Lmin Weight Ref.-No. Ø lashing [mm] [kg/pc.] Type Standard ten- [mm] force LC sioning force (Tenionser+ STF [daN] chain)
  • Page 5 5.5 ICE-VSK-CURT-K-IVH (direct lashing only) - Bar spindle tensioner Chain Type Permitted Tensioning device Lmin Weight Ref.-No. Ø lashing [mm] [kg/pc.] Type Standard ten- [mm] force LC sioning force (Tenionser+ STF [daN] chain) [daN] ICE-VSK-6-CURT-K-IVH 3,600 ICE-CURT-K-6-GAKO 4.8+2.5 7904493 direct lashing only...
  • Page 6: Ice-Vsk 16 25000

    ICE-VSK KK (ICE endless chains) Chain Ø Designation Lashing capacity Chain length Weight Article No. [mm] LC [daN] [mm] [kg/unit] ICE-VSK-KK-6 3,600 1,000 7901307 ICE-VSK-KK-8 6,000 1,200 7901308 ICE-VSK-KK-10 10,000 1,200 7901309 ICE-VSK-KK-13 16,000 1,500 7901310 ICE-VSK-KK-16 25,000 1,500 13.4 7901311 Table 12: ICE-VSK KK Spread...
  • Page 7 • ICE lashing chains ICE-VSK-CURT-K (sizes 6-16 mm) on is on hand. and ICE-VSK-CURT (size 16 mm) are not suitable That the statement on the identification tags of for vertical lashing. ICE-CURT-K-Bar spindle ten- the ICE lashing chains are according to the indi- sioners in the nominal sizes 6-16 mm, as well as cation of the manufacturer´s declaration.
  • Page 8: Important Hint

    IMPORTANT HINT • Special hints: Make sure that the securing disc does not stick Lashing chain types ICE-VSK-CURT-IMVK and to the load tube. Otherwise there is a danger of ICE-VSK-CURT-K-IMVK (Pic. 5 and 9): damaging the securing disc. Make sure that chains are attached as shown in Pic.
  • Page 9 2. Switching the ratchet mechanism to „Release“ (only for Ratched spindle tensioner ICE-CURT-GAKO -SL) Press the detent pawl at the two triangle symbols downwards resp. to the back (see Pic. 25). Pic. 22: 7. Ensure that the securing disc is loosened Make sure that the securing disc has been released Pic.
  • Page 10: Inspection And Testing

    When replacing components use generally new retai- ning pins and securing elements (split taper sleeves). • Use original RUD ICE spare parts only! • ICE lashing chains must only be used in combination Pic. 33: Patented ICE lashing chain inspection gauge for with ICE components (marked with ICE).
  • Page 11 10.2 Lubrication of ICE CURT IMPORTANT HINT Spindles must not be turned out with an in- The ICE CURT should be lubricated in regular intervals creased expenditure of force. There is a risk with grease at the lubricating point, to guarantee the run- of damaging the thread.
  • Page 12 All components like, ratchet tensioner, bar tensioner, lashing hooks, shortening elements, connecting elements, shackles, end links, overload indicator, are according to the RUD special quality grade ICE. All components, including the chain are marked as follows with the BG permittance stamp D1-12 and ICE markings.

This manual is also suitable for:

Ice-vsk 6Ice-vsk 8Ice-vsk 10Ice-vsk 13Ice-vsk 16

Table of Contents