Table of Contents
Advertisement
10.1 Menus and buttons
The PC application has a few menus and buttons to control the application.
Stop
Start
Toggle settings panel
-
Toggle settings panel: Show / hide the settings panel in the lower part of the GUI
-
Start:
-
Stop:
-
Zoom:
10.1.1 Settings
All settings that can be changed are available in the dialog box shown below. This dialog is
opened by pressing "Settings" in the menu.
Node discovery interval:
-
Start Node request interval:
-
Remove node after:
Slider for zoom
Figure 18: Menus and buttons
Connect to the location dongle
Disconnect the location dongle and clear all node lists
Set zoom level of the location area display
Figure 19: Settings
This value is given in seconds. The value sets
the
interval between
application attempt to start broadcast of node
requests. The value 0 can be used to disable the
broadcast of node requests.
The nodes registered by the PC application will
be checked regularly. The time since last
message from a node will be checked and if
longer than the time given in this field, the node
will be removed.
SWRU076D
CC2431
Zoom level
each
time
the
PC
Page 21 of 32
Advertisement
Table of Contents
