Table of Contents
Advertisement
A
E86768
A
Seat adjustment controls.
See Seats (page 127).
B
Memory pre-set buttons.
Up to four different driver seat and
exterior mirror positions can be
stored in the memory. Your preferred
setting for the reverse mirror dipping
feature can also be stored. See
Windows and mirrors (page 76).
Setting a memory pre-set
Passive setting
When this feature is enabled, the
vehicle stores the seating and mirror
positions for up to 4 remote controls
or passive keys. Next time the vehicle
is unlocked, the position of the seat
and mirrors will adjust to the last used
position. To disable this function, ask
your Dealer.
Each time you turn the ignition off,
the current seat and mirror settings
are stored on the remote control or
passive key used.
Convenience features
B
Active setting
1. Turn the ignition on.
2. Adjust the seat and exterior
mirrors to the desired position.
3. Press and hold the desired
pre-set button B until a single
chime sounds to confirm.
Easy entry easy exit
To allow the driver to enter and exit
the vehicle with ease, the driver's
seat will automatically:
•
Move back after a recall is done
with the remote control or passive
key.
•
Move back after the driver's door
is opened, unless the engine is
running.
•
Move to the driving position
(linked to the key used to recall)
after closing the driver's door and
switching the ignition on or a
passive key is recognised within
the vehicle.
To disable this function, see your
Dealer.
Recalling a stored seat
position
Note: To stop seat movement
during a recall, press any driver seat
adjustment control, any of the
memory buttons or any mirror control
switch. Seat movement will also stop
if you move the vehicle.
145
Advertisement
Table of Contents
