Jacuzzi J-Sha MI Assembly, Use And Maintenance Manual page 47

(fig. 19) Here is a graphic representation of how the described
variations act on your body:
19
(+)
(+)
Rhythmic impulse hydromassage (programme "C")
I (fig. 17) After selecting the classic hydromassage, select
programme "C" and press the
ing the remote control at the receiver on the edge of the tub
(fig.16).
I (fig. 20) Here is how the impulse hydromasage works:
A/B - first the jets graze the body...
C - ... then they increase their intensity almost immediately...
D/E - ... their power remains unchanged for a few seconds....
F - .. and then it goes back to the initial value...
and so on, again and again.
20
A B C D E
A/B C
I You can further personalize this programme by means of
sectors "C1" and "C2" (fig. 17).
Refer to the instructions provided above concerning activation
of sectors B1 and B2.
B1
TIME
(—)
B2
TIME
(—)
key. Make sure you are aim-
F
D/E
(fig. 21) Here is a graphic representation of how the described
variations act on your body.
21
(+)
TIME
TIME
NOTE
• There is one last regulation option, which acts on the fre-
quency of waves(programme B)/impulses (programme C)
(that is, more or less waves/impulses in a given time). This
adjustment is made via sectors"B3" or "C3" (depending on
whether you selected programme"B" or "C").
(fig. 22) still referring to the graphic representation, here is an
example:
22
TIME
F
47
C1
TIME
(—)
C2
(+)
TIME
(+)
B3
TIME
(+)
C3
TIME
TIME
TIME
(—)
TIME
(—)
TIME
(—)