Accessing Photos & Videos - Bresser 9633106 Instruction Manual

4. It can take up to 90 seconds for the
connection. When this following screen
shows up, the connection is successful.
What you see now on the App screen is
what the camera lens sees. The camera
screen (10) will also display "WIFI
connected".
5. Adjust the Settings if needed.
When the setting is done, press the < icon on
the top left OR the power button on the top
right to exit the App. The screen will show
Please wait and turn dark. The camera is now
ready to take photos and videos. Please make
9
sure the switch button (12) is pushed to ON.
Note: If at any time of the connection, the
camera or the app got stuck, please turn off
the camera (by pushing the switch button to
OFF), and wait for about 30 seconds, and turn
it on to try again.
9. ACCESSING PHOTOS & VIDEOS
VIA SD CARD
• Eject the SD card from the camera and
insert it into a card reader that is connected
to a computer.
• Open [My Computer] or [Windows Explorer]
and double-click the removable disk icon
that represents the Micro SD card.
• Copy images from the card into your
computer.
VIA USB CABLE
• Connect your camera to a computer with a
USB cable.
• Open [My Computer] or [Windows Explorer]
and double-click the removable disk icon
that represents the camera.
• Copy images from the folder into your
computer.
VIA APP
• In the App, click on the photo icon below to
enter the photo album, where you can see
all the photo and videos taken.
• You can select photos and videos to delete,
delete all, or download.