Page 1
* Available in IB-Lite 1.7 firmware B. UTP cable (RJ45), other network accessories (router etc.) 2. Turn off the controller (disconnect the controller from power source). Plug the IB-Lite module into the supported controller from the back side (see the picture bellow).
Page 2
Connection of IB-Lite to Ethernet/Internet by using of dynamic IP and AirGate Connection of IB-Lite to Ethernet by using of static IP or to Internet by using of public static IP Ad A) Direct connection between PC and IB Lite 4.
Page 3
IB-Lite Quick Guide Ad B) Connection of IB-Lite to Ethernet/Internet by using of dynamic IP and AirGate Use this possibility when you haven’t assigned static Ethernet IP address from your IT department or static public IP from your internet provider.
Page 4
ONNECTION Ad C) Connection of IB-Lite to Ethernet by using of static IP or to Internet by using of public static IP Use this possibility when your IT department has a Static Ethernet IP at your disposal or when the Static Public IP from your internet provider is available.
Need help?
Do you have a question about the IB-Lite and is the answer not in the manual?
Questions and answers