Table of Contents
Advertisement
3.7. Info
3.8. Settings
Info: displays the firmware version and EXP-MBTCP-ADV Card
serial number.
Clicking on Support calls up a list of all contacts for support,
customer service and direct links to pages on the Gefran website.
Account Settings: credentials management menu.
Not available in Easy mode.
To change access credentials, proceed as follows:
•
Enter the current password in the "Your password" box
•
Select the credentials you want to change under "Role you want to
change".
•
Enter the new username and password
•
Confirm the new password.
Username and password must be between 6 and 12 characters
Note!
long. The types of characters that can be used are upper case
letters, lower case letters, numbers and the following special
characters:
! # $ % & ( ) * + , - . / : ; < > = ? @ [ \ ] ^ _ { | }
Languages: language selection, English (default), Español and
Italiano available.
Legal notices: General Service Terms and Conditions.
Restart: Caution! This command reboots the device and you will
be disconnected.
Save all parameters: Caution! This command saves the modified
Modbus EXP-MBTCP-ADV converter parameters.
Soft factory configuration: resets all parameters to default
settings except for COMMUNICATION/Network Config menu
parameters.
Logout: disconnects the Webapp server..
Displays the firmware ver-
sion and EXP-MBTCP-ADV
Card serial number.
The first line at the top,
below the Home button,
displays the current access
level (Expert in the example)
The red LED is displayed
Note!
if the default password for the
current access level has not been
changed
Manuale scheda EXP-MBTCP-ADV - Pag. 7 / 8
3.8.1. Credentials management error messages
Message
Cause
Provided creden-
The 'Your password'
tial are invalid
field is incorrect
The newly entered
Malformed
credentials do not
credential
meet compliance
parameters
The username ente-
Username alrea-
red is already used for
dy in use
another access level
Credentials could not
Internal error
be updated
Solution
Enter correct password
Make certain that the creden-
tials are between 6 and 12
characters long.
Admissible characters: upper
case letters, lower case letters,
numbers
Special characters:
! # $ % & ( ) * + , - . / : ; < > = ?
@ [ \ ] ^ _ { | }
Enter a different username
Check connection.
Try again.
Advertisement
Table of Contents
