Related Manuals for Walker Edison V60MSC
Summary of Contents for Walker Edison V60MSC
- Page 4 Screw cam bolts (B) into side panels (1,2) , strengthen bars (4,5) and top panel (7). Insert dowels (A) into side panels (1,2) and middle side panel (3). Attach left drawer tracks (K) to side panels (1,2,3) using screws (G).Tighten screws (G) with a screwdriver.
- Page 5 Attach side panels (1,2) to strengthen bars (4,5) using large cam locks (D). Tighten large cam locks (D) with a screwdriver. Attach middle side panel (3) to strengthen bars (4,5) using large cam locks (D). Tighten large cam locks (D) with a screwdriver.
- Page 6 Slide back panel (6) into the stand assembly. Attach top panel (7) to the stand assembly using cam bolts and dowels as guides.
- Page 7 Attach left side panel (1) to top panel (7) using large cam locks (D). Tighten large cam locks (D) with a screwdriver. Attach right side panel (2) and middle side panel (3) to top panel (7) using large cam locks (D). Tighten large cam locks (D) with a screwdriver.
- Page 8 Attach side panels (9,10) and strengthen bars (11,12) to frame (8) using bolts (F) and washers (J). Tighten bolts (F) with wrench (P). Attach side panel (9) to frame (8) using bolts (F) and washers (J). Tighten bolts (F) with wrench (P).
- Page 9 Attach side panels (9,10) and strengthen bars (11,12) to frame (8) using bolts (F) and washers (J). Tighten bolts (F) with wrench (P). Attach side panel (9) to frame (8) using bolts (F) and washers (J). Tighten bolts (F) with wrench (P).Screw feet (M) into frames (8) and side panels (9,10).
- Page 10 Slide wooden frame into iron frame as shown in the diagram. Attach strengthen bars (11) to wooden frame using screws (H).Tighten screws (H) with a screwdriver.
- Page 11 Screw cam bolts (C) into drawer front panels (13,14). Attach right drawer tracks (L) to drawer side panels (15,16) using screws (G).Tihgten screws (G) with a screwdriver. Attach drawer side panels (15,16) to right drawer front panel (13) using small cam locks (E). Tighten small cam locks (E) with a screwdriver.
- Page 12 Attach drawer side panel (15) to left drawer front panel (13) using small cam locks (E). Tighten small cam locks (E) with a screwdriver.Slide drawer bottom panel (18) into the assembled drawer panels as shown in the diagram. Attach drawer end panel (17) to drawer side panels (15,16) using screws (H). Tighten screws (H) with a screwdriver.
- Page 13 Attach drawer side panels (15,16) to left drawer front panel (14) using small cam locks (E). Tighten small cam locks (E) with a screwdriver. Attach drawer side panel (15) to right drawer front panel (14) using small cam locks (E). Tighten small cam locks (E) with a screwdriver.
- Page 14 Attach drawer end panel (17) to drawer side panels (15,16) using screws (H). Tighten screws (H) with a screwdriver. Slide assembled drawers (13,14) carefully into palce as shown in the diagram.
- Page 15 Insert rubber cups (N) into the holes on the frame as shown in the diagram. Slide lower glass shelfs (19) carefully into position as shown in the diagram.
- Page 16 Place top glass (20) carefully on top of the frame as shown in the diagram.