Table of Contents
Advertisement
Chapter 21
Call Alert Paging
This feature allows your radio to work like a pager.
If other users are away from their radios or if they are unable to hear their radios, you can send them
an individual call alert page. You can also verify if a radio is active on the system.
If there is no answer after the maximum ring time or when you press the PTT button for an Enhanced
Private Call, the radio automatically sends a call alert page.
NOTE: This feature must be programmed by a qualified radio technician.
21.1
Sending Call Alert Page
Prerequisites: Ensure that your radio is programmed to support this feature.
Procedure:
Send a call alert page using one of the following options:
Option
Page Menu
Call Menu
•
The display shows Paging...<Number>.
•
If the call alert page is sent successfully, your radio shows the following indications:
-
A tone sounds.
-
The display shows Ack received and the radio returns to the Home screen.
•
If the call alert page is not acknowledged, your radio shows the following indications:
-
A tone sounds.
-
The display shows No acknowledge.
Actions
a Press the Page menu item.
b Press Cnts.
c To send the page, press the PTT button.
a Press the Call menu item.
b Press Cnts.
c Select the ID or alias.
d To initiate the call, press the PTT button.
If the target radio does not respond after a program-
med period, the display shows Send page?. Press
Yes.
MN009203A01-AA
Call Alert Paging
77
Advertisement
Table of Contents
