Table of Contents
Advertisement
Chapter 32
Radio Inhibit
This feature allows the system administrator to put a radio into a nonfunctional state when the radio is
missing or in an unknown hand. The radio stays in this state regardless of its power changes.
NOTE:
If the radio has Intersystem roaming capability, the system administrator is able to put the radio
into a nonfunctional state when the missing radio roams to another system.
The radio can only be uninhibited by receiving an uninhibited command from the system
administrator.
32.1
Switching between Repeater and Direct Operation
Repeater operation increases radio coverage area by connecting with other radios through a repeater.
Direct or "talkaround" operation bypasses the repeater and connects directly to another radio. You can
select either one of these operations on your radio.
Procedure:
Perform one of the following actions:
•
Press the programmed Repeater/Direct button.
•
From the Home screen, press the Dir menu item.
MN009203A01-AA
Radio Inhibit
93
Advertisement
Table of Contents
