Table of Contents
Advertisement
Chapter 10
Tactical Public Safety (Conventional
Only)
Tactical Public Safety (TPS) enables the member of a group to identify the start and the end of a
transmission by displaying the caller name or ID on the radio display.
10.1
Using TPS Normal Transmission
Procedure:
In the TPS Zone Channel, perform one of the following actions:
•
To talk, press and hold the PTT button.
•
To listen, release the PTT button.
•
Receive and listen to the call.
The display shows the caller name or ID.
10.2
Using TPS Emergency Transmission
Procedure:
1 Press the programmed Top (Orange) button.
The Emergency Beacon tone sounds.
2 To call, press and hold the PTT button.
3 To listen, release the PTT button.
The Emergency Call De-Key Sidetone sounds. After a short pause, the Emergency Beacon tone
sounds.
4 To exit or cancel the Emergency mode, press and hold the programmed Top (Orange) button.
MN009203A01-AA
Tactical Public Safety (Conventional Only)
55
Advertisement
Table of Contents
