BOLERO AGUAZERO 6600 Instruction Manual page 78

ENGLISH
10. AUTOMATIC FAULT WARNING AND POSSIBLE SOLUTIONS
PROBLEM POSSIBLE FAULT
CODE
FF Water inlet system fault
F5 Pressure system fault
F3 Continuous water inflow
F2 Unable to drain water
F8 Heating error
F1 Overflow
FE Defective electronic board
F7 Overheating
F9 Diverter motor position fault
F6 Defective heating sensor
78
SOLUTIONS
Make sure the water inlet tap is open and the
water is flowing
Remove the water inlet hose tap and clean
the hose filter
Contact the Cecotec Technical Support
Service
Contact the Cecotec Technical Support
Service
Close the tap and contact the Cecotec
Technical Support Service
The water drain hose and the filters may be
blocked
Cancel the programme
If the error persists, contact the Cecotec
Technical Support Service
Contact the Cecotec Technical Support
Service
Unplug the machine and close the tap
Contact the Cecotec Technical Support
Service
Contact the Cecotec Technical Support
Service
Contact the Cecotec Technical Support
Service
Contact the Cecotec Technical Support
Service
Contact the Cecotec Technical Support
Service