BOLERO AGUAZERO 6600 Instruction Manual page 65

4.4. Combination detergents use
These products must be used according to the manufacturer instructions.
-
Never place combination detergents in the washing section or in the cutlery basket.
-
Combination detergents contain, apart from detergent, rinse aids, salt substitution
-
substances and additional components depending on the combination.
We do not recommend using combination detergents with short programmes. Use powder
-
detergent with these programmes.
If you have any problem using combination detergents, contact the detergent manufacturer.
-
When you stop using combination detergents, make sure the water hardness and rinse aid
-
are set to the correct level.
Rinse aid use
- Use only detergents designed specifically for household dishwashers. Keep the rinse aid in
a cool, dry place and out of reach from children.
Rinse aid is used to promote the drying of the dishes without marks and stains. Rinse aid is
-
released automatically during the rinse at high temperature phase.
This dishwasher is designed to use liquid rinse aids.
-
If the rinse aid dose is too low, there will be whitish stains in the dishes and they will not
-
dry correctly.
If the rinse aid dose is too high, you will see bluish layers on glass and dishes.
-
Never fill the rinse aid compartment with other substances, as this could damage the
dishwasher.
Filling the aid rinse dispenser
Fig. 8
Remove the cover of the rinse aid compartment by lifting it.
1.
Pour the rinse aid in the dispenser carefully, avoiding spilling it out of the dispenser.
2.
Close the cover by pressing it until it is locked in place.
3.
Be careful not to spill rinse aid outside the dispenser and clean it if spilled.
-
The rinse aid is set at 4 by default.
-
If the dishwasher does not dry correctly or leaves stains, increase the rinse aid level.
-
Rinse aid setting
Turn on the machine by pressing the power button.
1.
Hold down the programme button for 5 seconds or until the display shows 'rA'. The rinse
2.
aid setting is based on the water hardness. It will then show the last setting level.
Set the level by pressing the programme button.
3.
Turn off the dishwasher to save the setting.
4.
ENGLISH
AGUAZERO 6600 /INOX/DARK
65