BOLERO AGUAZERO 6600 Instruction Manual page 72

ENGLISH
running, the delay start time will be cancelled.
To save any programme as favourite, press the programme selection button (2) and the
-
delay start button (3) at any time. To select your favourite programme, hold down the
programme button (2) for 3 seconds.
Energy save mode
Open the door and hold down the programme button (2) and the option button (6) at once
1.
for 3 seconds.
After 3 seconds, the machine will show the last setting, 'IL1' or 'IL0'.
2.
When the energy save mode is active, the display will show 'IL1'. In this mode, the interior
-
lights (if available) will turn off 2 minutes after opening the door and the dishwasher will
turn off after 15 minutes of inactivity to save energy.
- When the energy save mode is active, the display will show 'IL0'. If the energy save mode
is deactivated, the interior lights will light up while the door is open and the machine will
stay on unless the user turns it off.
To save the last setting you have selected, turn off the dishwasher.
4.
The machine will have the energy save mode setting activated by default.
Changing the running programme
If you wish to change the programme when the dishwasher is operating:
Press the Start/Pause button.
1.
When the programme ends, select the desired programme with the programme selection
2.
button.
Start the new selected programme by pressing the Start/Pause button.
3.
The new programme which is running will resume the previous programme in the phase
4.
it was running.
Cancelling a running programme
If you wish to cancel a programme when it is running:
Hold down the Start/Pause button for 3 seconds.
1.
During cancellation, the end of programme indicator will flash. The machine will drain
2.
the water.
When the end of programme indicator lights up, turn off the machine with the power
3.
button.
Buzz control
To set the buzz intensity, follow these steps:
Open the door and hold down the options and programme selection buttons at once for
1.
3 seconds.
The dishwasher will emit a long buzz and machine will show the last setting, from S0 to
2.
S3.
72