BOLERO AGUAZERO 6600 Instruction Manual page 70

ENGLISH
1. Power button
Press this button to turn the dishwasher on and off.
2. Programme selection button
Use this button to choose a programme. The programme indicator for the selected
-
programme will light up (2.1).
To obtain more details about the programmes, check the "Programmes table" section.
-
3. Delay start button
Use this button to delay the start hour of a programme between 1-2 and 24 hours, before
-
running it. The delay start indicator will light up (3.1).
If you wish to change the delay start time, first press the Start/Pause button and, next, the
-
delay start button to select a new delay start time. To activate the new delay start time,
press the Start/Pause button.
To cancel the delay start, you must select 0 hours with the delay start button.
-
4. Remaining time indicator
This indicator will help you control the programme status through the washing, rinse, dry, final
and remaining time indicators.
5. Start/Pause button
Press the Start/Pause button to start or pause the programme. The washing indicator will
-
light up and the remaining time indicator will show the programme length.
It will also show the remaining time during the programme running.
-
If you open the machine door will the programme is running, the programme length will
-
stop and the corresponding programme phase indicator will start flashing.
6. Option button
You can select options by pressing the option button repeatedly.
-
A flashing LED will show the selected option.
-
7. Selection button
Confirm the option by pressing the selection button.
-
The LED of the selected option will light up and will be steady.
-
8. Rinse aid indicator
If the rinse aid level is low, the rinse aid indicator will warn you that you must refill the rinse
aid dispenser.
9. Salt indicator
If there is enough salt, the salt indicator will light up to warn you that you must refill the salt
compartment.
70