Subscribe to Our Youtube Channel
Related Manuals for Avidyne IFD4 Series
Summary of Contents for Avidyne IFD4 Series
- Page 1 QUICK REFERENCE IFD4XX IFD440 FMS/GPS/NAV/COM IFD410 FMS/GPS IFD100 App for iPad avidyne.com | 800.AVIDYNE...
-
Page 2: Overview Diagram
FMS knob (the outer ring scrolls through each box, whereas the inner ring scrolls through the fields of each box), or 2. Utilize hybrid touch by tapping the screen on a waypoint or in the blank space between waypoints. avidyne.com | 800.AVIDYNE... - Page 3 Volume/Power/ Enter (select) Squelch Knob Frequency Swap Procedure (flip-flop) Line Select Keys Direct To (LSK) COM/NAV* Manual Tuning Knob (Push for CDI Nav Source NAV & Transponder) Page Function Keys (two-way rocker) Active Waypoint FMS, MAP, AUX FMS Knob (context- sensitive: scroll, zoom/ Standby Frequency* push to select)
- Page 4 Here’s how: When a flight plan waypoint is a valid airway entry point, a dropdown list of available airways appears. Scroll to the desired exit point, and all intermediate intersections along that airway are automatically populated into the flight plan. avidyne.com | 800.AVIDYNE...
-
Page 5: Inserting A Waypoint
Inserting a Waypoint To add a waypoint Use the right Push the right to your flightplan, knobs or tap knob, press ENTR, or tap tap the empty the identifier space where your to display the ENTR key cursor is below the QWERTY on the QWERTY ‘Origin.’... - Page 6 (You can also your saved route to the route tab cusomize the selections. on the FMS page. name of the route here). avidyne.com | 800.AVIDYNE...
- Page 7 Activate a Stored Route Then press the To activate a route To activate, press the “Activate Flight from the stored routes “Activate Route” LSK or list, tap the desired Plan” LSK or touch- touch-screen button. screen button. route to select.
-
Page 8: Direct-To Operation
Pressing ENTR box pre-populated box. The QWERTY or the right knob can with a logical waypoint keyboard appears for also be used to confirm. (powered by Geofill™). you to enter the desired waypoint identifier. avidyne.com | 800.AVIDYNE... -
Page 9: Selecting A Departure
Selecting a Departure To begin the process of Tap the ‘Departure’ Select the transition selecting a departure field. A dropdown (departure Runway) procedure, tap on list of available and push ENTR. the Origin box to departure procedures select. A ‘Departure’ will be displayed. -
Page 10: Selecting An Approach
Each subsequent press of the “PROC” key will step through all following destination airfield approaches/arrivals in the flight plan, and wrap back around to the origin. When the drop down box appears over the intended data field, tap the desired procedure to add to the flight plan. avidyne.com | 800.AVIDYNE... - Page 11 Selecting a Visual Approach To select a Visual To select the desired Then select the Visual Approach for your Visual Approach, twist Entry, (Straight In, destination airport , the FMS knob to scroll Left Base, Right Base, press the “PROC” Function down past any published Left Downwind, Right key.* This will display a...
- Page 12 FMS populated with a drop down (turn direction, knob to select. either standard list of options. leg length, or published inbound course). hold data. avidyne.com | 800.AVIDYNE...
- Page 13 Exiting/Deleting a Hold To Exit the hold, A blue CAS Other options Should you need select the “Exit message will include deleting to continue to Hold” Line Select the Hold alert you that you Hold, select Key (LSK1), and are ‘Exiting hold Waypoint with “Continue Hold”...
- Page 14 North Up (360°) -> Track Up (240° arc view) -> Track Up (360°) *If a Heading source is connected to the IFD, then you can set preference for Heading Up rather than Track Up in AUX->SETUP page under Map Orientation. avidyne.com | 800.AVIDYNE...
-
Page 15: Decluttering The Map
Decluttering the Map TAB: To select the preferred level of map density displayed, from the Map Page, Map tab, press the “Land” LSK to declutter the terrain base map and/or “Nav” LSK to declutter off-route NavAids (Intersections, Airports, VORs etc). There are four levels of declutter for each. The specified level of detail will remain consistent across all map pages. - Page 16 EDR and your aircraft is 1,000 the perceived distance NCR remain enabled. ft AGL or greater, and above and behind the will disappear as you ownship symbol. descend below 1,000ft. avidyne.com | 800.AVIDYNE...
- Page 17 COM Radio Tuning Applies to IFD440 only. Radio Tuning can be accomplished through 3 different methods. Twist the COM/ Notice that Touch the Activate the NAV knob to twisting the COM/ standby frequency. direct-tune. Use NAV knob also frequency field Once the desired the inner knob brings up the FREQ...
- Page 18 QWERTY frequency. to the standby, keyboard. Type direct-tune got press the flip- KHz and the the identifier flop button outer knob to of the VOR to make it the adjust MHz. (powered by active frequency. GeoFill™). avidyne.com | 800.AVIDYNE...
-
Page 19: Updating Databases
Updating Databases Insert Jump Drive in Press PROCEED line USB Port, then power Use right knob to select key (LSK). up. Jump drive must select Data file to be Press DONE button on be formatted to FAT32 transferred to IFD. screen when complete, and should have your Twist the FMS knob to... - Page 20 Set IFD WiFi to ‘ON’ auto-connect on all using touchscreen or by launch IFD100 App subsequent flights. turning inner right knob. so that IFD sees that (you can also ‘Block’ you are trying to gain unwanted iPad permission to connect. connections). avidyne.com | 800.AVIDYNE...
- Page 21 Using IFD100 iPad App It is important to note the NAV databases of your IFD5XX and your IFD100 App must match, in that they must be the same cycle (have the same expiration date). If you are not seeing a Flightplan on your IFD100 after launch and you know your WiFi connection is good, it’s most likely that these do not match.
- Page 22 Tabs, acting just like the two-way rocker switches on the IFD5XX. Activate the Side Tab on the IFD100 just as you would on the IFD5XX--either by touching it directly, or by touching andholding the highlighted Page button. avidyne.com | 800.AVIDYNE...
- Page 23 IFD100 - Changing Map View TAB: ‘TRK’ indicated Indicates when Heading ‘North Up’ not available. North Up (360°) TRK Up (360°) TRK Up (240° arc view) (or HDG Up* (360°) or HDG Up* (240° arc view) You can change Map View of IFD100 (orientation) by touching the HDG box on the MAP page, which will cycle the Map between three different views: North Up (360°) ->...
- Page 24 The Terrain Awareness and Alerting feature shows nearby terrain within 1,000 feet as yellow hashed pattern, and terrain within 100 feet or above in red hashed pattern. Pinch zooming the display will adjust the perceived distance above and behind the ownship symbol. avidyne.com | 800.AVIDYNE...
- Page 25 IFD100 - Portrait Mode Rotate your iPad for Portrait display of all the same screens as in landscape mode, but with better vertical map distance.
- Page 26 Touch 3 dots in top- Launch IFD 100- You will App. middle of screen then be prompted to select select Split Screen another App. This is (Middle icon). where you launch the IFD100 App. Both apps will now be running. avidyne.com | 800.AVIDYNE...
- Page 27 NOTES...
- Page 28 PILOT SUPPORT 888.723.7592 Mon-Fri: 8:00AM–5:00PM EDT / 1200-2100 UTC visit: techsupport.avidyne.com email: pilotsupport@avidyne.com AFTER HOURS TECHLINE™ 877.900.4264 PILOT TRAINING avidynetraining.com P/N 600-00350-000 Rev01 AVI22-033 ©2022 Avidyne Corp. All Rights Reserved. 08/22 avidyne.com | 800.AVIDYNE...
Need help?
Do you have a question about the IFD4 Series and is the answer not in the manual?
Questions and answers