Manual Tuning - Clarion FB275BTB Owner's Manual

Radio Operations
LOCAL SEEK
If the button is pressed and held in position for
1.5 seconds or longer, local seek tuning will be
enabled. Broadcast stations with good reception
sensitivity are selected.
∗ When local seeking starts, "LO" appears in the
display.

Manual tuning

There are 2 ways available: Quick tuning and
step tuning.
When you are in the step Tuning mode, the fre-
quency changes one step at a time. In the Quick
Tuning mode, you can quickly tune the desired
frequency.
1. Press the [ BND ] button and select the desired
FM band.
∗ Press and hold the [ BND ] button for 1.5 seconds
or longer to switch to Manual Seek mode. Make
sure "MANUAL TUNE" is displayed briefly.
2. Tune into a station.
Quick tuning
Press and hold the [
onds or longer to begin station tuning.
Step tuning
Press the [ ] button to perform manual
,
tuning.
Preset memory function
Preset memory function can store up to 18 sta-
tions:
Six stations for each of FM1, FM2, and FM3.
∗ Factory default setting is empty for all channels.
Manual memory function
1. Press the [ BND ] button, to select a band you
want to store in the memory.
2. Press the [
,
desired station.
3. Press and hold one of the [ DIRECT ] buttons
for 1.5 seconds or longer to store the current
station into preset memory and "SAVED" will
be displayed briefly.
] button for 1.5 sec-
,
] button to tune into a
Auto store
Auto store is a function for storing up to 6 stron-
gest stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains un-
overwritten at the memory position.
1. Push and hold the [
1.5 seconds or longer. The stations with good
reception are stored automatically to the preset
channels.
Notes:
The stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
The auto store procedure may take up to 40 sec-
onds to complete.
Recalling a preset station
A total of 18 preset positions ( 6-FM1, 6-FM2, 6-
FM3 ) exists to store individual radio stations in
memory. Pressing the corresponding [ DIRECT ]
button recalls the stored radio frequency auto-
matically.
1. Press the [ BND ] button and select the desired
FM band.
2. Press the corresponding [ DIRECT ] button to
recall the stored station.
∗ Press and hold one of the [ DIRECT ] buttons for
1.5 seconds or longer to store that station into
preset memory.
Note:
If there is no preset channel stored, "- -EMPTY- -" is
displayed briefly and reverts to previous frequency
display.
Instant station recall ( ISR )
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even oper-
ates with the unit in other modes.
] knob for
11
FB275BT / FB275BTB