FODSPORTS M1-S Pro Manual
- Operation manual (144 pages) ,
- Operation manual (44 pages)
Advertisement
- 1 Outlook
- 2 Recharge
- 3 On / Off
- 4 Pair Up To Different Devices
- 5 Pairing With Cellphone
- 6 Telephone Function
- 7 Voice Command
- 8 Music Selections Functions
- 9 Wire Connecting
- 10 Operating Scenario 1
- 11 Operating Scenario 2
- 12 Operating Scenario 3
- 13 Multiple Intercom
- 14 Q&A
- 15 Videos
- 16 Documents / Resources
Sound Volume
Long period or too loud may hurt hearing ability.
Disassemble or modification
The M1-S PRO is precisely made in the factory. Any disassemble or modification may damage the device. Please do not tear any of the safety regulation and serial number sticker from the device, that will void warranty. Please contact us at winzon.cs@outlook.com if needed.
Warranty:
In normal use, we offer one year warranty from the date of purchase. Any disassemble, modification, will void warranty.
Outlook
| Functions | Device Pair Up |
| Switch On: When device is off, press intercom + function at same time for 3 seconds. Switch Off: When device is on, press intercom + function at same time for 3 seconds. Power Detect: When device is on, short press volume - and volume + at same time. Voice control function (Only If your cellphone is equipped): Short press function button once. Switch on external wired devices such as speed detector...: when device is on, long press volume - and volume + at same time for 3 seconds. | Pairing mode: When device is on, long press function for 5 seconds. Search mode: When device is on, long press intercom button for 5 seconds. Remark, pairing mode is for pairing up to other devices like cellphone, gps.... Search mode is for pairing up with other M1-S PRO. |
| Music Function | |
| Play: When device is on, short press volume + twice. Pause: When music playing, short press volume + twice. Volume up: When playing music, short press volume + once. Volume down: When playing music, short press volume - once. Play previous: When playing music, long press volume + for 2 seconds. Play next: When playing music, long press volume - for 2 seconds. | |
| Cellphone Function | |
| Answering call: Short press function once. Hangup call: After call, short press function once. Refuse call: Long press function button for 2 seconds. Redial: Short press function button twice. Volume up: Press volume + while talking. Volume down: Press volume - while talking Switch manual/automatic answering calls: While in standby, press and hold the intercom button and volume "+ ""- "button at the same time for 3 seconds. | |
| Intercom Function | |
| Switch intercom on: when device on: short press intercom once Switch off: when talking, short press intercom once Volume up: when talking, short press volume + once Volume down: when talking, short press volume -once | |
| Special Function | |
| Update mode: Plug in the Data & power cable, press volume - and function at same time for 5 seconds. Memory clear: When device is on, press volume+ and function at same time for 5 seconds. |
Recharge
Recharge
For first time use, please recharge the device until red light is off.
- Use data and power cable plug to the socket, connect to power source.
*Bike usb chargers are not recommended, unstablized circuit may damage the device. - When connecting to power source, red light appears in function button. When recharge complete, red light is off. Complete recharge is about 2 hours.
Low power notification
When power lower than 10%, Red light flash in the function button and voice message will remind power lower than 10%, please recharge immediately.
Power Detect Function
M1-S PRO has power detection function, when device is on, short press volume - and volume + at same time. Recorded voice message will remind you.
Power over 90%
Power over 50%
Power lower 50%
Power lower than 10% please recharge immediately
Voice control function( only if your cellphone is equipped): short press function button once
Switch on external wired devices such as speed detector...: when device is on, long press volume - and volume + at same time for 3 seconds.
On / Off
Switch On
- Switch on: long press function and intercom button at same time for 3 seconds, until blue light flash in function button. Voice message says "welcome to the Fodsports bluetooth communication system".
Switch Off
- Switch off: When the device is on, long press function and intercom button at same time for 3 seconds, until red light flash in function button. The device will detect power and voice message will says "power off".
Pair Up To Different Devices
M1-S PRO can pair to different bluetooth devices.
Pairing Mode
When device is on, long press Function Button.
Pairing mode, red and blue light flash Voice message says pairing.
Search Mode
When device is on, long press intercom button.
Search mode, red and blue light flash 0.5 second between each flash, one second between each flash. It's search mode, voice message shows "Searching" sound.
Pairing With Cellphone
When device is on, long press function → Red and blue light flash in the function button, entering pairing mode
Switch on cellphone bluetooth, chose FODSPORTS M1-S PRO, the pairing is complete. Voice message will also say pairing complete. Remark, when pairing complete, please check both cellphone audio and media audio are all chosen, otherwise call or music can't be processed.
Telephone Function
Answer/Hangup
M1-S PRO is set to automaticity answer incoming calls, when incoming calls, beside rings, blue light flashes. Push FUNCTION BUTTON to answer and push function button to hang up. When talking, press VOLUME + and VOLUME - to adjust volume.
Redial
When the device is on, short press function button twice, will redail, blue light flashes.
*Only redial last call out number
Voice Command
When your M1-S PRO is paired up with your cellphone, when both device are on, short press function button once, will automatically switch on the voice command function
*Cellphone must be equipped with this function
Music Selections Functions
Play/Pause
Play music
When cellphone and M1 -S paired up, when both devices are on, short press volume+ twice, will play music.
Pause
When playing music, short press volume + twice, will pause.
Previous
Long press volume+ for 2 seconds, will play previous music in your cellphone music list.
Next
Long press volume- button for 2 seconds, will play next music stored in your cellphone music list.
Wire Connecting
M1-S PRO equipped with wire connection function in order to connect to devices without bluetooth. As long as the device is connected by 3.5mm aux out, all can transmit voice signal to M1-S PRO. When device wire connected by 2.5mm to 3.5mm cable to M1-S PRO, long press volume+ and volume- for 3 seconds to switch on the connection.
* When wired mode is switched on, it will keep it on until switch off the M1-S PRO.
Operating Scenario 1
One person use, pair to cellphone + bluetooth gps device + bluetooth speed detector
A first of all, pair up gps and cellphone.
Pair up M1-S PRO with gps, after paired, please switch off bluetooth function in the gps.
Lastly, pair up M1-S PRO with bluetooth speed detector, after paired, switch on gps bluetooth function.
*After M1-S PRO paired with gps, if don't switch off gps's bluetooth, its will interference the pairing when pairing to speed detector. Recommended to switch gps bluetooth off, after pair up to detector, switch the bluetooth back on.
Operating Scenario 2
Two person intercom, and pairing to cellphone + bluetooth gps + speed detector or radio
Passenger Procedure:
Step 1: switch rider headset to search mode, passenger headset to pairing mode. When both headset stop red+blue light flashes, they are paired.
Step 2: switch rider headset to pairing mode, cellphone search this M1-S PRO and pair it up.
Step 3: keep riders headset in pairing mode, use bluetooth gps to search rider's headset and pair it up.
Step 4: use 2.5mm to 3.5mm aux in to connect speed detector or radio to M1 -S PRO, and switch M1-S PRO to Wire Connecting, all audio integrade complete.
Please read STEP 9. For Wire Connecting.
Operating Scenario 3
Two man intercom, rider using cellphone + bluetooth gps, passenger using bluetooth Speed detector
Pairing Procedure
Step 1: switch rider headset to search mode, passenger's headset switch to pairing mode, when red and blue light stop flash, intercom pairing complete. At same time instantly switch on intercom.
Step 2: Set rider headset to pairing mode, use cellphone to search rider's headset to complete pair up.
Step 3: set rider's headset to pairing mode, use bluetooth gps to search rider's headset and complete.
Step 4: set passenger's headset to pairing mode, use bluetooth speed detector to search passenger headset and complete pair up.
Multiple Intercom
Multiple intercom pairing procedure
*Numbers of device which the headset can be paired 8 x M1-S PRO (A, B, C D), multiple intercom connections, the connection will occupy channels, thus only unit A can connect to the other two bluetooth devices, the others B, C, D can only connect to one bluetooth device.
M1-S PRO equipped multiple intercom function, support 8 units talk same time, but recommended 4-6 units, pairing procedure as follow.
Step 1: switch on both A and B unit, long press A unit intercom button to search mode, Then long press unit B function button to pairing mode. When blue light on both intercoms, pairing complete. (You should press the intercom button on B unit to end the talking if you need to pair with more than 2 units, in order to new pairing later)
Now A and B unit pairing complete.
Step 2: When B C units on power on status, long press unit B intercom button to search mode, Then long press unit C function button to pairing mode. When blue light on both units, pairing complete. (You should press intercom button on B units if you need 3 units talk same time, then 3 units will light on blue same time. Or you should press intercom button on C unit to end the talking if you need to pair with more than 3 units)
Three unit pairing complete.
Step 3: When C D units on power on status, Long press unit C intercom button, then long press unit D function button. When blue light on both units, pairing complete. (You should press intercom button on B C units if you need 4 units talk same time, then 4 units will light on blue same time. Or you need to press intercom on D unit to end the talking if you need to pair with more than 4 units). Please repeat above steps if you need to pair with 5 or 6 or 7 or 8 units.
Four units pairing complete.
*Interruption
In multiple intercom mode, if there is an incoming call caused one of unit away from the connection. After call, will reconnected automatically. If interruption is caused by distance or bad signal. Please press intercom button to reconnect.
Multiple intercom reconnect procedure
M1-S PRO will remember paired units. But after switch off and want to reconnect again, please follow the procedure.
Step 1: switching off all four units and all bluetooth device connected to the headset.
Step 2: switch on C and D unit, press C unit intercom button to connect to D unit.
Step 3: switch on B unit, press B unit intercom button to connect to C and D unit.
Step 4: switch on A unit, press A unit intercom button to connect to B, C and D unit. After all four unit reconnected, switch on original connected bluetooth devices.
Q&A
No sounds from one or two side speaker.
A1: Check device plug, needs to firmly connected.
Can it be recharged from bike USB charger while riding?
A21: Not recommended, unstablized power source will cause damage on internal circuit, may cause unable to recharge/can't fully charged/can't switch on.
A22: Power bank is a good choice.
When using radio, not transmission or continuous transmission.
A3: Pls check whether plug the 2.5mm pin deeply enough.this pin built in waterproof parts, It is easily misunderstand it have been pluged well because of a little resistance.
New device can't switch on.
A4: Recharged at least 30mins before use.
VideosM1-S PRO Intercom - Start Guide Video
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the M1-S Pro that isn't answered in the manual? Leave your question here.