KitchenAid Dishwasher Cycle Guide
Also See for Dishwasher:

Advertisement

KitchenAid Dishwasher Cycle Guide

Cycle Guide

Cycle Guide


The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the best wash performance. If the incoming water is less than the recommended temperature of 120° or food soils are heavy, the cycle will automatically compensate by adding time, heat, and water as needed.

This information covers several different models. Your dishwasher may not have all of the cycles and options described.

CYCLES AVERAGE WASH TIME (HOURS) WATER USAGE GALLONS (LITERS)
ProWash ProWash Senses soil to automatically optimize cycle. ProWash cycle is selected if START is pressed first.* 2 ¼ 3.8 (14.2 L)
Tough Tough Use for hard to clean items. 2 ¾ 4.6 (17.6 L)
Normal Normal This cycle is recommended for daily, regular or typical use to completely wash and dry a full load of normally soiled dishes. This dishwasher's government energy certifications were based on the Normal cycle with only the Heated Dry option selected.** 2 ¼ 2.4 (9.1 L)
Express Wash Express Wash Use when you need faster results. 1 5.9 (22.4 L)
Rinse Only Rinse Only Use for rinsing dishes, glasses, and silverware that will not be washed right away. Do not use detergent. 1/2 2.0 (7.4 L)

*The government energy certifications are not based on this cycle. See the Normal cycle description for the government energy certification cycle. Using the Sensor cycle may increase your energy usage.

**No other washing and drying temperature options were selected, and it was not subject to truncated testing. Rinse aid was not used, and there was no detergent used in the prewash.

OPTIONS CAN BE SELECTED WITH WHAT IT DOES ADDED TIME TO CYCLE ADDED WATER GALLONS (LITERS)
• Hi Temp Wash High Temp Wash Helps remove tough, baked on food. Tough, ProWash, Normal Increases main wash temp up to 135°F (54°C) to 140°F (60°C). Increases final rinse temp to 140°F (60°C). 0 to 0:45 0-1.4
(0-5.1 L)
• Sani Rinse Sani Rinse Sanitizes dishes and glassware in accordance with NSF International NSF/ ANSI Standard 184 for Residential Dishwashers. See this section in the Owner's Manual. Tough, ProWash, Normal Increases main wash temp up to 140°F (60°C) to 140°F (60°C). Increases final rinse temp to 156°F (69°C). 0:10 to 1:15 0-2.3
(0-8.5 L)
• Heat Dry Heat Dry
(Some Models) ProDry
Dries dishes with heat. Load plastic item in upper racks. Dries dishes with heat and a fan. Load plastic item in upper racks. Tough, ProWash, Normal, Express Wash Dries dishes with heat or with heat and fan on some models (default on with some cycles). 0:33 to 0:39 NA
• Extended Heat Dry Extended- Heat Dry
(Some Models) ProDry Extended
Increases the Energy used for drying the dishes. This may lengthen the cycle time.. Tough, ProWash, Normal Dries dishes with heat or with heat and fan on some models. 0:05 to 0:20 NA

DISHWASHER FEEDBACK

CONTROL PURPOSE COMMENTS
• Start
RESUME
START Press to start or resume a wash cycle. If the door is opened during a cycle or power is interrupted, Start/Resume indicator light flashes. Cycle will not resume until door is closed and Start/Resume is pressed.
NOTE: Push door firmly closed within 4 seconds of pressing Start/Resume. If door is not closed within 4 seconds, the Start/ Resume button light will flash, an audible tone will be heard, and cycle will not start.
• Cancel
DRAIN
CANCEL Press to cancel wash cycle. Close door firmly. The dishwasher starts a 2 minutes drain (if needed). Let dishwasher drain completely.
• Control Lock
Hold for 3 Sec
CONTROL LOCK Control Lock avoids unintended use of dishwasher between cycles or cycle and option changes during a cycle. To turn on Lock, press and hold heated dry for 3 seconds. Control Lock light will stay on, indicating that it is activated and all buttons are disabled. If you press any button while your dishwasher is locked, light flashes 3 times. Dishwasher door can still be opened/closed while controls are locked.
To turn off Lock, press and hold heated dry for 3 seconds. Light turns off.

Cancelling a Cycle

  1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely opening the door.
  2. Press and hold CANCEL/DRAIN for 4 seconds. The CANCEL/ DRAIN light will turn on.
  3. Close the door, and the dishwasher starts a drain cycle (if water remains in bottom of dishwasher). Let the dishwasher drain completely. The Cancel/Drain light turns off after 3 minutes.

Changing a Cycle After Dishwasher Is Started

You can interrupt a cycle and restart the dishwasher from the beginning using the following procedure.

  1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.
  2. Check that detergent dispenser cover is still closed. If cover is open, you will need to refill the detergent dispenser before restarting the new cycle.
  3. Press CANCEL/DRAIN to reset the control.
  4. Select new cycles and options.
  5. Press START/RESUME.

Adding a Dish After Dishwasher is Started

  1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.
  2. Check whether the detergent dispenser cover is still closed. If it is open, the wash cycle has already started and adding a dish is not recommended.
  3. If detergent has not yet been used (detergent dispenser cover is closed), you may add a dish.
  4. Push door firmly closed and press START/RESUME within 4 seconds. If you take too long, the Start keypad light flashes, and you will hear an audible tone. Press START/RESUME again and close the door within 4 seconds.

Videos

How To Load a Dishwasher Guide Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download KitchenAid Dishwasher Cycle Guide

Advertisement

Need Assistance?

Do you have a question about the Dishwasher that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents