Partitioning On Windows 2000 / Xp - Kanguru USB User Manual

Kanguru QuickSilver
6. Partitioning and Formatting

Partitioning on Windows 2000 / XP

Partitioning allows you to take one large drive and make it into multiple smaller
drives. Partitioning requires formatting the drive and will erase all data if
any exists on the drive.
1. To partition the QuickSilver, plug the drive into your computer, then right-
click on the My Computer icon (icon may be located in Start menu on
some XP systems) and choose Manage to open Computer Management.
2. Locate Disk Management below the Storage submenu on the left side of
the window. The right side of the window will update, showing you a list of
all the drives connected to your system.
3. Locate the Kanguru QuickSilver in the bottom half of the Window. In order
to partition the drive you will have to delete the current partition by right
clicking on the status bar (see below) to the right of the disk and choosing
Delete Partition. Next to create a new partition, right-click on the status
bar and choose New Partition.
4. The New Partition Wizard will appear to create to the new partition.
Follow the on screen instructions to complete the partition and formatting
process.
- 12 -
Status Bar