Kanguru Flash Drive User Manual page 15

KanguruWireless LAN
WEP Key: Choose from either Disable, 64-bit, or 128-bit. You can choose
"Create Key Manually" or "Create Key with Pass-phrase" to enter encryption
keys. It allows the entry of four keys for 64-bit and 128 bit according to the WEP
function selected. To be written to the driver and registry, each key must consist
of the correct sequence of digits. Please refer to the sections below for detailed
instructions.
• Create Key Manually: First you must select the desired encryption
strength, and then fill in the keys according to the following:
o For 64-bit encryption:
o For 128-bit encryption:
• Create Key with Pass-phrase: A pass-phrase can be entered which is
used as a "seed" to randomly generate the four keys. This saves a
considerable amount of time since the same keys must be entered into
each node on the wireless network.
Once you have created the keys either manually or with a pass-phrase, you can
then select the Key to use for the encryption.
5 alphanumeric characters in the range of "a-z", "A-Z", and
"0-9".
10 digit hexadecimal values in the range of "a-f", "A-F" and
"0-9".
13 alphanumeric characters in the range of "a-z", "A-Z", and
"0-9".
26 digit hexadecimal values in the range of "a-f", "A-F" and
"0-9".
- 15 -