Page 1
9 - 10 Use Liquid Thread Locker SRC Design uses Metric System of Measurement and all dimensions are in Millimeters * Recommended to use the Torque specified in the table ** Denotes Usage of Liquid Thread Locker in specified locations...
MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3
The Small Radiator Pin which projects from the bottom side of the Radiator, has to be passed through the hole in the bottom side of the Radiator Guard, as shown. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
Radiator pin, as shown in the drawing on the left-hand side. The final mounted condition of the Radiator Guard is as shown in the drawing on the Right-hand side. Copyright By SRC Design and Specification are subjected to change Page 4...
Vehicle. It is always advised to check loosening of the fasteners after the first 50 kilo meters of ride and at regular intervals. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC To the maximum extent possible, our design use the current Mounting/Fitment of the...