Advertisement
Step 2:
Orient and Align the Radiator
Guard (1), as shown, and in-line
with the Top flap with the
mounting point, as shown in Red
colour, and Slip-in the
Hexagonal head bolt, which was
removed earlier and secure the
threads.
The Small Radiator Pin which
projects from the bottom side of
the Radiator, has to be passed
through the hole in the bottom
side of the Radiator Guard, as
shown.
Copyright By SRC
Design and Specification are subjected to change
Mounting Instructions
Step 1:
Remove the Fastener in the top
side of the Radiator, as shown
and the one holding the bottom
clip.
The same screws has to be used
for mounting the Radiator
Guard, along with other
hardware as per the BOM.
Page 3
Advertisement
