Additional Information - FUTABA T18SZ Quick Start Manual

Hide thumbs Also See for T18SZ:

ADDITIONAL INFORMATION

Trim T5 as global elevator trim: (

Trim T2 is used "as usual" for elevator trim, i.e. it sets elevator trim separate for every flight condition.

Trim T5 is used, at the same time, and adjusts the elevator trim for all (wanted) flight conditions.

This trim T5 is useful to set the elevator neutral position (when flying) for all flight conditions at the same time.

It is still possible to adjust every flight condition individually with trim T2.

Elevator Trim = T5 + T2

LINKAGE – FUNCTION

Channel 14, Auxilary7, Control = "- -", Trim = "T5"

GLIDER – PROGRAM MIXES

Mode = Mixing

Mixing menu 2:

ON (not INH), Trim= ON

Master = Auxilary7

Slave = Elevator

Mixing menu 1:

Rate A, Rate B = +100)

For V-tail:

Set Slave - Elevator - Link to '+'.

Magnus Hedlund

instead):

missing on 16SZ, use T3

Page 9

Table of Contents