Table of Contents
Advertisement
Warning of electrical voltage
Before any work on the device, remove the mains plug from the mains socket!
Hold onto the mains plug while pulling the power cable out of the mains socket.
Warning
Dangers can occur at the device when it is used by untrained people in an unprofessional or
improper way! Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may use it as a dangerous toy.
Note
If you store or transport the device improperly, the device may be damaged.
Note the information regarding transport and storage of the device.
Behaviour in the event of an emergency
1.
In an emergency, disconnect the device from the mains feed-in: Switch the device off and
disconnect the power cable from the mains socket. Hold onto the mains plug while doing so.
2.
Do not reconnect a defective device to the mains.
Overheating protection
The device is provided with a thermal protection circuit which is activated by overheating of the
device and then switches the device off.
Allow the device to cool down and switch it off. Investigate the cause of overheating. Should the
problem persist, please contact the customer service.
Information about the device
Device description
The submerged waste water pump is suited for draining, conveying and pumping over clear water
with the contained suspended matter not exceeding a maximum particle size of 16 mm.
A float ensures the automatic switch-on and switch-off at a respectively defined height.
Additionally, the switch-on/-off height can be finely adjusted within the specified range by means
of a locking device, see technical data.
The water temperature must not exceed 35 °C.
8
Hide quick links:
Advertisement
Table of Contents
