Safety - PRO STORMER BDP40020 Instruction Manual

Do not pull the mains plug by the power cable
This symbol indicates that you must not pull the mains plug out of the socket by the power cable.
Pull the mains plug
This symbol indicates that the mains plug must be removed from the socket when the device is
not in use.
Not suitable for pumping potable water
This symbol indicates that the device is not suitable for pumping potable water.
Submerge pump at a slight angle
This symbol indicates that the pump must be submerged into the water at a slight angle to allow
the remaining air to escape.
Warranty and liability
The device complies with the fundamental health and safety requirements of the applicable UL
regulations and was tested at the factory for perfect functionality multiple times.
However, if faults in the functionality occur and cannot be remedied with the measures in the
chapter Errors and faults, please get in touch with your dealer or distributor.
When making a warranty claim, supply the device number (see label on the device).
When manufacturer's instructions or legal regulations have not been followed, or after
unauthorised changes to the device are made, the manufacturer is not responsible for the
resulting damages. Changes to the device or unauthorised replacement of individual parts can
drastically impact the electrical safety of this product and will result in the loss of the warranty.
Liability does not extend to damages to people or property caused by the device being used
other than as described in the instructions in this operating manual. Subject to changes to
technical design and model changes as part of constant development and product improvement
without prior notice.
No liability is accepted for damages resulting from improper use. In such a case, any warranty
claims will be voided also.

Safety

Read this manual carefully before starting or using the device. Always store the manual in the
immediate vicinity of the device or its site of use!
Warning
4