MSI TRX40-A PRO Quick Start Manual page 27

7. Place the heatsink on the motherboard, align the bolts with the mounting nuts on
the motherboard. Then, tighten the bolts in a diagonal order to spread the tension
properly across the sides.
8. Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.
⚠
Important
Always unplug the power cord from the power outlet before installing or removing
∙
the CPU.
Please retain the protective caps after installing the processor. MSI will deal with
∙
Return Merchandise Authorization (RMA) requests if only the motherboard comes with
the protective caps on the CPU socket.
When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink
∙
is necessary to prevent overheating and maintain system stability.
Confirm that the CPU heatsink has formed a tight seal with the CPU before booting
∙
your system.
∙ Overheating can seriously damage the CPU and motherboard. Always make sure
the cooling fans work properly to protect the CPU from overheating. Be sure to apply
an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to
enhance heat dissipation.
∙ Whenever the CPU is not installed, always protect the CPU socket pins by covering
the socket with the plastic cap.
∙ If you purchased a separate CPU and heatsink/ cooler, Please refer to the
documentation in the heatsink/ cooler package for more details about installation.
This motherboard is designed to support overclocking. Before attempting to
∙
overclock, please make sure that all other system components can tolerate
overclocking. Any attempt to operate beyond product specifications is not
recommended. MSI® does not guarantee the damages or risks caused by inadequate
operation beyond product specifications.
2 3
4 1
Overview of Components
17