Starting Cold Engine - Echo SRM-410X Operator's Manual

SRM-410X

Starting Cold Engine

The attachment will operate immediately when the engine
starts, and could result in possible serious injury. Keep
movable parts of the attachment away from objects that could
become entangled or thrown, and surfaces that could cause
loss of control.
If a protective blade cover is used, ALWAYS remove blade cover
before starting equipment.
1. Stop Switch
Move stop switch button (A)
forward, away from the STOP
position.
2. Choke
Move choke lever (B) to COLD
START ( ) position.
3. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
4. Press decompression device
(D)
X7502168400
© 11/20 ECHO Incorporated
A
B
C
OPERATION
D
27