Operation - Echo SRM-410X Operator's Manual

OPERATION

3. Slide harness clamp up (A) or
down until unit balances with
head or blade 200 mm ± 100
mm (8 in ± 4 in) from the
ground (B).
4. Tighten harness clamp screw.
5. Loosen handle clamp screw(s),
and position handle for
comfortable operation.
6. Tighten handle clamp screws
securely.
OPERATION
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS
position unit so that exhaust is directed away from your face
and body.
Operation of this equipment may create sparks that can start
fires around dry vegetation. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine.
Metal cutters can also create sparks if the cutter strikes rocks,
metal, or other hard objects. Contact local fire authorities for
laws or regulations regarding fire prevention requirements.
20
SRM-410X
X7502168400
© 11/20 ECHO Incorporated
B