Table of Contents
Advertisement
SRM-410X
1
Lower Handle Bracket with Barrier Bar
4
Bolts (handle to shaft)
4
Nuts (handle to shaft)
1
Shield Base
1
Shield Plate
3
Screws (shield to gear case)
1
Shield W/ Cut Off Knife
1
Shield W/O Cut off Knife
1
Shoulder Harness
1
Nylon Line Head
1
Warranty Statement
ASSEMBLY
Support Handle Installation
1.
Position support handle (A) on shaft
and install barrier bar (B) using screws
(C) and nuts (D). Support handle (A)
must be at least 10 in. (250 mm) from
center of rear handle grip.
2.
Adjust support handle (A) position for
comfortable operation, and tighten
screws (C) securely.
X7502168400
© 11/20 ECHO Incorporated
ASSEMBLY
A
B
17
Advertisement
Table of Contents
