Base Station Installation - Vertex Standard VX-4500 Installation Manual

Hide thumbs Also See for VX-4500:

Power Connection

Operation of the VX-4500/-4600 transceiver from an AC line requires a power

supply capable of providing at least 10 Amps (for 25 W model) or 15 Amps (for

45 W/50 W models) continuously at 13.6 Volts DC. Please contact your dealer to

select an optimal power supply that satisfy these requirements.

Use the supplied DC power cable for making power connections to the power

supply. Connect the RED power cable lead to the POSITIVE (+) power supply

terminal, and connect the BLACK power cable lead to the NEGATIVE (–) power

supply terminal.

Antenna Installation

When used the VX-4500/-4600 transceiver as a base station, the antenna installa-

tion must comply with the following requirements in order to ensure optimal per-

formance and compliance with the RF energy exposure limits in the standards and

guidelines.

 The antenna should be mounted outside the building on the roof or a tower if

at all possible.

 As with all fixed site antenna installations, it is the responsibility of the licens-

ee to manage the site in accordance with applicable regulatory requirements

and may require additional compliance actions such as site survey measure-

ments, signage, and site access restrictions in order to insure that exposure

limits are not exceeded.

VX-4500/-4600 T

ase

tation

AC Power Supply

( 13.6 V, 10A or 15 A )

ransceiVer

nsTallaTion

nstallation

RED: POSITIVE ( + ) Terminal

BLACK: NEGATIVE (–) terminal

uide

Antenna

Table of Contents

Vx-4600