Advertisement
Fold & Carry
1
2
1 +
2
1
Lift the safety lock, and push down the quick release lever.
3
4
Align the bell and the
Hold the stem with either one hand
buckle and hook them.
or both hands to carry.
3
4
3 +
4
2
Lift the safety lock and push down the quick release
lever again, then fold the stem.
Open
5
Disengage the bell lever from the
buckle on the mudguard.
Adjust the Disc Brake
Before adjustment, make sure the scooter is powered off and not charging.
If the brake is too tight/loose, use the 4 mm Allen key to loosen the screw on the caliper. Then slightly adjust the brake line
(decrease/increase the exposed length), and tighten the screw again.
Inflate the Tire
Valve Cap
Unscrew the valve cap.
Connect the extension nozzle to the
tire valve stem.
Note: please check the tire pressure regularly, and inflate the tire if its pressure is insufficient.
Brake Cable
Connect the pump to inflate the tire.
Advertisement
