Panasonic NV-HS1000 Service Manual page 51

(D Infrared Remote Control Receiver Window
®
OPERATE Indicator
Lights up when the VTR is turned on.
@ STAND BY Indicator
.Lights up when the AC mains lead is connected and
1--'
the VTR is turned off.
I
@) TIMER REC Indicator
Lights up when the timer recording lunction is on.
�
@ TAPE IN Indicator
Lights up when a cassette is Inserted.
@ S•VIDEO IN (AV3)
To connect the S-Video cable to a movie camera or lo
another VTR that has a S-Video output socket.
(!) VIDEOIN(AV3)
To connect the video cable to a movie camera or to
another VTR.
@ AUDIOIN(AV3)
To connect the audio cable to a movie camera or to
another VTR.
@ EDIT
To connect a movie camera or another VTR equipped
with an edit socket or an editing controller.
@) SYN C.EDIT
To connect a movie camera or another VTR equipped
with synchronized editing capability.
(jJ) MI C
To connect a microphone for recording. Once
connected, this socket has priority.
@ PHO NES
To connect stereo headphones.
56
16
@) RFOUT
To connect to the aerial terminal on a T V set.
@ NORMAUS-VIDEO OUT/TEST SIGNAL
NO RMAL: Normally set to this position.
S-VIDEO OUT (AV1 ):
Set to this position when connecting the
VTR to a T V set equipped with 21-pin
Euro-AV Connector with pins for separate
Y/C signal input.
TEST SIGNA L:
Set to \his position when tuning the T V Into
the VTR.
The test signal Is transmitted on channel
36and AV1.
@) AUDIOOUT
To connect the sound to a stereo audio system.
@ RFIN
To connect lo the external aerial.
@ CHADJ.
To adjust the RF lransmilling channel 32-40.
@) AV1
This 21 ·pin scart terminal carries input and output
signals for both picture and sound. TV sets equipped
with a similar socket can be connected here.
This is also called Searl
P eri\el
Euro Connector
Euro AV
I 3 5 7 9 ll 13 IS 17 19
00000000000,,
0000000000
2 4 Ci B 10 12 IA 16 IB 20
Controls and Connection Sockets
15
NO RMAL (AV1/AV2) S-VIDEO (AV1)
1 AUDIO OUTPUT 1 AUDIO OUTPUT
CH2 (R)
CH2 (R)
2 AUDIO INPUT CH2 (R) 2 AUDIO INPUT CH2 (R)
3 AUDIO OUTPUT 3 AUDIO OUTPUT CH1
CH1 (L) (L)
4 AUDIO GND 4 AUDIO GND
5 BL UE GND 5 No connection
6 AUDIO INPUT CH1 (L) 6 AUDIO INPUT CH1 (L)
7 No connection
7 BL UE
8 SWITCHING 8 SWITCHING
VO LTA GE
VOLTA GE
9 GREEN GND 9 No connection
10 No connection 10 No connection
11 GREEN 11 No connection
12 No connection 12 No connection
13 RED GND 13 No connection
14 BLANKING GND 14 No connection
15 RED 15 C OUT
16 BLANKING 16 No connection
17 VIDEOOUTPUTGND 17 VIDEOOUTPUTGND
18 VIDEO INPUT GND. 18 No connection
19 YOUT
19 VIDEOOUTPUT
20 VIDEO INPUT 20 VIDEO INPUT
21 GND 21 GND
Caution: RGB reservation for only E/E operation when
connecting the P ay T V decoder
@) AV2
To connect to a decoder or another VTR.
•O nly used as the input socket.
@) VtDEOOUT
To connect the video cable to a T V or another VTR.
@ S·VIDEOOUT
To connect the S-Video cable to a T V or another VTR
that has a $-Video input socket.
@ ACIN~
To connect to the main power supply.
57