Panasonic NV-HS1000 Service Manual page 29

Storing TV Broadcasts into your VTR
1,5 3 2,4
Introduction
The VTR Is fitted with Its own tuner Oust like a normal TV
set) and can be pre-set to receive up to 99 TV broadcast
stations.
Operations Display Symbols_
1
0
I-
I
TUNER
PRESET
2
..
,-1
SPII..P
V
0 0
<+I 0
(NEXT)
3
0
SLEEP
(SHIFT)
4
,-,
V
0 0 <+<
5
0
TUNF.A
PRl:SET
Preparation
•Confirm that the TV Is on and the VTR viewing channel Is
selected.
•Turn on the VTR and Select the programme position
except A 1, A2 and A3.
Keep TUNER PRESET pressed for more
than 2 seconds.
Select the programme position, then press
SP/LP (NEXT).
Select normal TV station or Pay TV (e.g.
Canal Plus, Filmnet) station.
• 1: To preset normal TV stations.
•2: To preset Pay TV stations.
Search for the required TV station.
•Press SP/LP (NEXT) and repeat steps 2-4 for each
programme position you want to tune to a station.
2
Press TUNER PRESET twice.
12
Direct Channel Input Tuning Procedure
If you know the channels on which the TV stations can be
received, the TV stations can be tuned in bv followina the
• -
steps given below.
1 Keep TUNER PRESET pressed for more than
2 seconds.
2 Select the programme position by using A ( +) or v
(-), then press SP/LP (NEXT).
3 Select normal TV station or Pay TV (e.g. Canal Plus,
Fihnnet) station by pressing SLEEP (SHIFT).
•1: To preset normal TV stations.
•2: To preset Pay TV stations.
4 Input the channel number for the required TV station by
using Number buttons on the remote controller.
•Press SP/LP (NEXT) and repeat steps 2-4 for each
programme position you want to tune.to a station.
5 Press TUNER PRESET twice.
Fine Tuning Procedure
1 Keep TUNER PRESET pressed for more than
2 seconds, and then press again.
2 Press SP/LP (NEXT).
3 Press A (+)orv (-) to obtain the best tuning
condition.
•"AFC" Indicator disappears.
•To return the tuning to its former state, press SLEEP
(SHIFT).
4 Press TUNER PRESET.
13
Storing TV Broadcasts Into your VTR
Blanking of Unoccupied Programme
Positions
� l{eep TUNER FRESET pressed for more than
2 seconds.
2 Select a programme position which you do not want to
tune to a TV station, by using A(+) or v (-).
3 Press SLEEP (SHIFT). ("--" is displayed.)
•Repeat steps 2 and 3 for another unoccupied
programme positions to skip during the selection of the
programme positions.
• To cancel the blanking of a programme position, select
that programme position on the VTR and then press
SLEEP (SHIFT).
4 Press TUNER PRESET twice.
Channel Pian
Channel Indication
TV Channel
2-12
E2-E12
--
13-20
21-69
21-69
74-76
S1-S3
80-82
M1-M3
83-89
M4-M10
90-99
U1-U10
121-141
S21-S41