Panasonic NV-HS1000 Service Manual page 47

•
I �
0
c5
... . . ... .......
== =
"'
c:m::::J
III
Preview Function
Before performing actual editing, this function allows
confirmation of editing operations without recording.
Select PREVIEW after setting the edit start and end
points,
0
2 Press ENTER,
•Preview begins.
INSERT
CJ
m
RECOROcR •
►PLAYER
Pt!EVIEW
Notes:
•Preview function works only when this VTR is used as the
recording VTR,
•Preview function does not work during assemble editing,
�- � I
l l
-- --·----
-
'o' o--i:, ..
��
-
___
III
III III III' III III III III III
...... .. ..... ......
,
,.,.
Review Function
After editing has been completed, this function plays back
from the edit start point to the edit end point on the
recording VTR,
Select REVIEW after performing editing.
0
□
2 Press ENTER.
•Review begins,
....,
CJ
48
, •
Edit Timing Adjustment
When performing editing in conjunction with a unit which
has a different mechanism, there may be a lag in the edit
start point due to a deviation between the time a pause
cancellation signal is received by the recording unit and the
time recording actually begins,
Edit Timing Adjustment is used to compensate the edit start
and end time In light ol this start-up lime deviation,
1 Record the second hand on a stopwatch with a movie
camera.
2 lnserl lhis recorded cassette Into the playback unit, and a
cassette with an intact erasure prevention tab Into the
recording VTR,
3 Using the point where the second hand reaches zero as
Ille edil slar\ point, penorm copying,
4 Play back the copied laps, and check how many seconds
had elapsed at the recording start point
• If timing Is correct, recording should begin at exactly
zero seconds.
5 Select TIMING ADJUST from the screen below,
COPYiNG
■PLAYER flIHilll■
PERFORM fDJTING
0
lll?l!lli!l!ll!I
SELECT
PREVIOUS
6 Press ENTER.
TIM!NGADJU _ S T
CJ MARK lfi
Programme Editing
7 Adjust lhe tirt,ing for the star! point by setting the amount
of the discrepancy of the second hand.
•The setting Is displayed in frame (Vao of a second) units.
Thus If, for example, one second had elapsed, set to
-25 .
•Corrections can be made In the range of ±30 frames
(1,2 second),
0
11M1NG ADJUST
MARK IN
i-----.-----==-,
...
t!C DC
S(LECT
PR(VIOUS PAGE :llil
ll Adjus\ \he timing iDT \he end pain\ in \he same manner.
TIMl�G .-.oJUSf
MARK OUT
CJ
mIIJJ
':
fif� � ��us PMltlii·Dl:I
Note:
Edit timing adjustment function only works during
programme editing,
To cancel All Editing Programmes
1 Select ALL CLEAR from the screen below.
PROGRAMME EDITING
ASSEMOLE
INSERT
AV INSERT
AUDIO Ollll
l.llEm:J
2 Select YES.
•All programmes will be canceled,
AI.LClEAR
NO
I'm
49
-2s
· 1 5