Inactive Standby; Factory Reset - TechniSat DigitRadio 360 CD IR Instruction Manual

Time/Date
The Time/Date can be automatically set once it has been connected to the Internet, DAB+ or FM radio
station with time/date information. You may also adjust the Time/Date manually.
- Press the CLOCK button to access Set Time/Date.
Alternatively,
- During System settings mode, press the PRESET
the ENTER button to confirm. Press the PRESET
press the ENTER button to confirm.
The date digits will flash on the display.
1.
Press the PRESET
2.
Repeat above Step (2) to set the Month/Year/Hour/Minute.
3.
The date and time settings are now complete.
4.
For the other settings under Time/Date, press the PRESET
options and then press the ENTER button to confirm.
Auto update
Set format
Set timezone
Daylight savings
The default auto time update setting is "Update from Network". If you would like to manually set
the time, it is recommended to turn the Auto update function off.

Inactive Standby

Use the Inactive Standby to turn off the unit after a certain time in play mode.
During System settings mode, press the PRESET
1.
then press the ENTER button to confirm.
The display will show : Off > 2 hours > 4 hours > 5 hours > 6 hours
2.
Press the PRESET
3.
Language
During System settings mode, press the PRESET
1.
press the ENTER button to confirm.
Press the PRESET
2.
Press the ENTER button to confirm.
3.

Factory Reset

There may be times when you need to reset your unit back to the factory settings especially when you
have moved house. If you experience reception problems you may want to reset and try again. If you
move to another part of the country and pick up the local and national DAB+ stations in that area, your
previously tuned channels may no longer be available.
During System settings mode, press the PRESET
1.
press the ENTER button to confirm.
buttons to adjust the day and then press the ENTER button to confirm.
Update from DAB / FM / Network.
12 / 24 hour format.
Select a time zone. (Only available when Auto update from Network is on.)
Select daylight savings. (Only available when Auto update from Network is on.)
buttons to select and then press the ENTER button to confirm.
buttons to change the display language of your choice.
buttons to select Time/Date and press
buttons to select Set Time/Date and
buttons to select from the following
buttons to select Inactive Standby and
buttons to select Language and then
buttons to select "Factory reset", and
8