Getting Started - TechniSat DigitRadio 360 CD IR Instruction Manual

GETTING STARTED

Powering ON/OFF
When you first connect the unit to the mains socket, the unit will be in STANDBY mode after showing
"Welcome to Internet Radio STARTING...." (F.1)(F.2)
1. Press the Standby
2. Press the Standby
mode.
(F.1)
Welcome to
Internet Radio
STARTING
Selecting Modes
Press the MODE button repeatedly on the unit or press the CD/USB, FM/DAB, AUDIO IN, INTERNET,
SPOTIFY button on the remote control to switch between Music player, DAB radio, FM radio, AUX In,
CD, Internet radio and Spotify Connect modes.
When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
To switch the unit off completely, remove the mains plug from the main socket.
Please turn the unit off completely to save energy when not in use.
Adjusting the Volume
- -
Turn the VOLUME +/– dial on the unit or press the VOLUME +/– buttons on the remote control
to adjust the volume.
- -
If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE
button again or press the VOLUME +/– buttons on the remote control or turn the VOLUME +/–
dial to resume normal listening.
Navigating the Menu
Press and hold the MENU button on the unit or press the MENU button on the remote control
1.
to access the menu.
Turn the Volume +/- dial on the unit or press the PRESET
2.
your choice.
Press the SELECT button on the unit or press the ENTER button on the remote control to
3.
confirm your selection.
This instruction manual explains the basic instruction for operating this unit. Unless otherwise
stated, all operations described are based on remote control use.
button on the unit or remote control to switch the unit on.
button on the unit or remote control to switch the unit back to standby on
(F.2)
00/00/000
00 : 00
buttons on the remote to select
6