System Settings - TechniSat DigitRadio 360 CD IR Instruction Manual

System Settings

Press the MENU button to display the menu, press the PRESET
and then press the ENTER button to confirm. Press the PRESET
settings and then press the ENTER button to confirm.
Equaliser
This system supports a variety of equalizers and sound effects.
- Press the EQ button to access Equaliser menu
Alternatively,
- During System settings mode, press the PRESET
press the ENTER button to confirm.
The display will show : FLAT > CLASSIC > ROCK > POP > JAZZ
1.
Press the PRESET
2.
Network
During System Settings mode, press the PRESET
1.
the ENTER button to confirm.
Press the PRESET
2.
button to confirm.
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote
PIN Setup
Network profile
Clear network
settings
Keep network
connected
Press the BACK button on the unit or on the remote control to cancel the setting and return
3.
back to the previous menu.
buttons to select and then press the ENTER button to confirm.
buttons to select from the following settings, and then press the ENTER
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Wired – select wired network.
Manual config – select wired/wireless network with DHCP enable/disable.
Select PBC on the unit and press the PBC button on the modem device that you
wish to connect with. Press the ENTER button to continue.
Display the setting on the unit.
Select a country of your choice.
Select wired/wireless network with DHCP enable/disable.
To define a PIN number to be entered before being able to connect to the unit
remotely over a network
View the connected network.
To delete the connected network memory in Network profile.
To define whether remains connected to its network in Standby mode and when not
in Network radio mode. This is necessary for remote operation and audio
streaming in Music Player mode.
buttons to select Equaliser and then
buttons to select Network and press
7
buttons to select Main menu
buttons to select System