ROOMS TO GO 73051066 Assembly Instructions

ROOMS TO GO 73051066 Assembly Instructions

Advertisement

R
Identify all parts packed in the carton against the parts list. Remove all protective
materials. Place parts on a non-abrasive surface to avoid scratching.
Do Not Attempt Assembly If Any Parts Are Missing OrDamaged.
Warning: Please do not use acid or alkaline washing liquid to clean the product.
Assemble the product as shown below, step-by-step.

Part List

NO.
SKETCH
DESCRIPTION
A
B
C
D
Foot Glider
Assembly Instructions
QTY
4
Leg
1
Fixed Ring
1
Table Top
4
NO.
SKETCH
DESCRIPTION
AA
BB
CC
DD
JWUA GLA-5106-2848W
Made in China
73051066
QTY
Bolt
4
(M6*20)
Bolt
8
(M6*25)
Steel Washer
12
(Φ14*Φ6.5*1.5)
12
Boltcap
1
Wrench
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 73051066 and is the answer not in the manual?

Questions and answers

Summary of Contents for ROOMS TO GO 73051066

  • Page 1 73051066 Assembly Instructions Identify all parts packed in the carton against the parts list. Remove all protective materials. Place parts on a non-abrasive surface to avoid scratching. Do Not Attempt Assembly If Any Parts Are Missing OrDamaged. Warning: Please do not use acid or alkaline washing liquid to clean the product.
  • Page 2 STEP 1 Hand Tighten Nut 3-4 Revolutions Only,Do Not Tighten All The Bolts AndNut. STEP 2 Hand Tighten Nut 3-4 Revolutions Only,After Attached All The Bolts,Adjust All The Part At Correct Position,Then Tighten All The Bolt And Nut.Do Not Over Tighten.
  • Page 3 STEP 3 Need two people turn the Table right side Need two people turn the Table right side up.Adjust the pre-installed foot glider(D) installed foot glider(D) at the end of each Table leg until the Table is level with the ground Securely, Your at the end of each Table leg until the Table is level with the ground Securely, Your at the end of each Table leg until the Table is level with the ground Securely, Your Table is ready for use.

Table of Contents