Table Of Contents - Rheem HBT200 Installation Instructions Manual

Collectors with copper waterways, conetite connections for use in direct systems using uncoated dr brass conetite fittings
Table of Contents

Advertisement

HOUSEHOLDER - This installation instruction booklet is
intended for the installer but you may find it of interest.
Components And Kit Contents .................................................. 4
System Installation ...................................................................... 6
Installation - Solar Storage Tank ............................................... 8
Solar Collector Location ............................................................. 9
Roof Assembly Of Solar Collectors ......................................... 16
Connection Details .................................................................... 22
Pipe Work Roughing In Dimensions ........................................ 26
Installation - Solar Collectors .................................................. 32
Warranty Note ............................................................................ 35
Notice to Victorian Customers from the
Victorian Plumbing Industry Commission.
This water heater must be installed by a licensed person
as required by the Victorian Building Act 1993.
Only a licensed person will give you a Compliance Certificate, showing that
the work complies with all the relevant Standards. Only a licensed person will
have insurance protecting their workmanship for 6 years. Make sure you use
a licensed person to install this water heater and ask for your Compliance
Certificate.
CONTENTS
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hbt200lcsHbt200s

Table of Contents