Titan TN-1341 Instruction Manual page 6

The Titan TN-1341 comes with a knee lifter unit that allows the operator to lift the presser foot with
a knee controller. This is a standard feature but can be changed to a pneumatic lifter as an option
(See option page). To mount the knee lifter, follow the instructions below.
1. Attach knee lifter plate rod (Fig 2, Item 5) and knee press plate cover (Fig 2, Item 6) to knee
lifter plate rod bracket (Fig 2, Item 4)
2. Align the direction of the pad with setscrews (Fig 2, Item 7, 8 and 9) to the operator's
comfort.
3. Be sure to note thee travel of the knee lifter can be large and may require an additional
person to find a perfect comfort for the operator.
6
INSTALLATION (Con't)
Figure 2
TN-1341 INSTRUCTION MANUAL