Power Supply; Charging The Battery - Panasonic HC-X2 Owner's Manual

Preparations before recording
4
Connect the microphone cable
to the <AUDIO INPUT1>
terminal.
(C) <AUDIO INPUT1> terminal
(D) Microphone cable clamp
When wiring the microphone cable, use the
microphone cable clamp of this unit.
Remove the microphone cable from the
0
<AUDIO INPUT1> terminal while pushing
the lever.

Power supply

A battery or the supplied AC adaptor can be used as the power supply for
the unit.
The unit is compatible to following batteries. (As of August 2022)
0
– AG-VBR59 (supplied/optional, supports quick charging)
– AG-VBR89/AG-VBR118 (optional, supports quick charging)
Use the supplied AC adaptor. Do not use the AC adaptor of another device.
0
The supplied AC cable is dedicated for this unit. Do not use with any other device.
0
Also, do not use AC cable from other device on this unit.

Charging the battery

The battery is not charged at the time of purchase. Use only after charging sufficiently.
It is recommended that you have one extra battery.
It is recommended to perform charging of the battery in a location with ambient
0
temperature of 10 °C to 30 °C (50 oF to 86 oF) (same for the battery temperature).
18
DVQX2253 (ENG)
(C) (D)