Battery; Lcd Monitor And Viewfinder; Memory Cards; Speed Class During Shooting - Panasonic HC-X2 Owner's Manual

Cautions for use
If you prepare to record important images, always shoot some advance test footage
0
to verify that both pictures and sound are being recorded normally.

Battery

Always remove the battery from the unit after use.
0

LCD monitor and viewfinder

The LCD monitor and viewfinder are managed with high precision so that at least
0
99.99 % of the dots are effective pixels and 0.01 % or less are invalid pixels and
always lit. This is not a malfunction and it has no effect whatsoever on the recorded
images.

Memory cards

The SD cards can be used with the camera.
Do not perform the following operations when accessing the memory card (the card
0
1 access lamp/card 2 access lamp is flashing in orange).
– Removing the memory card
– Disconnecting battery or the AC adaptor without turning off the main unit
– Apply vibration of impact
Keep the memory card out of reach of children to prevent swallowing.
0

Speed Class during shooting

The memory card to use differs depending on the file format and the recording
format.
Use memory cards compatible with the Speed Class or UHS Speed Class.
The recording may stop suddenly when a memory card not compatible with the
required Speed Class is used.
10
DVQX2253 (ENG)