Related Manuals for Walker Edison BS64LAN1D
Summary of Contents for Walker Edison BS64LAN1D
-
Page 2: General Assembly Guidelines
Concealed hinges are three-way adjustable. Horizontal In-and-Out Vertical by screw adjustment by loosening the hinge-arm Via slots in the mounting mounting screw or via cam plate or via cam adjustment adjustment © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. - Page 5 Step 1 Insert wooden dowel (A) into parts (8,9)，then secure Cam bolt (B) to part (3) with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 6 Step 2 Using Bolt (F) attach part (6) into parts (1,2) with hex key (G) as per diagram. Note: Do not fully tighten all bolts . © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 7 Repeat the last step as per diagram.
- Page 8 Using Bolt (T) attach part (3) to parts (6,13) with hex key (G) as per diagram. Note：Fully tighten all bolts.
- Page 9 Using Screw (R) connecting both parts (7) to Nut (Q) with Wrench (X) ,then using Screw (S) attach part (7) to parts (6,13) with Philips head screwdriver as per diagram.
- Page 10 Step 6 Using Cam lock(C) secure part (9) to part (3) with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.10...
- Page 11 Step 7 Using Cam lock(C) secure part (8) to part (3) with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.11...
- Page 12 Step 8 Put part (11) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.12...
- Page 13 Step 9 Using Bolt (U) attach part (5) to part (12) with Hex key (G) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.13...
- Page 14 Step 10 Using Screw (E) attach part (5) to parts (8,9) with Hex key (G) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.14...
- Page 15 Using bolt (F) attach Bracket (V) to part (1) with Hex key (G) . Then using screw (H) secure plastic wedge (J) to part (11) with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.15...
- Page 16 Step 12 Place sticker (D) cover the holes as per diagram . © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.16...
- Page 17 (P) in the same level. So the shelf is not titled .Put part (4) into unit as per diagram. Tilt and rest the adjustable shelf(4) onto the shelf support pins . © P.17 Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 18 Using handle bolt (N) attach handle (M) to part (10) ,and using Screw (L) attach Europe Hinge (AA) to part (10) with Philips head screwdriver as per diagram.
- Page 19 Using Screw (L) attach Europe Hinge (AA) to part (8) with Philips head screwdriver as per diagram.
- Page 20 Using Screw (L) attach Europe Hinge (AA) to part (9) with Philips head screwdriver as per diagram.
- Page 21 Wall Using screw (Y) attach Flat Washer (W) ,Bracket (V) and Nut (Z) to Wall with Philips head screwdriver as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.21...