Hayward SUMHEAT HP5131DT3 Installation Instructions Manual page 5

Swimming pool heat pump unit
Table of Contents

Advertisement

1. PREFACE (continued)
Connect and properly tighten the power cable. A loose connection could
damage electrical components.
Exposing the heat pump to water or a humid atmosphere could cause
electrocution. Be very careful.
If you detect a fault or any abnormal situation, do not install the heat pump and
contact your dealer immediately.
All maintenance work should be done at the recommended intervals, as
specified in this manual.
Repairs must be carried out by qualified personnel.
Only use OEM spare parts.
Never use a cleaning method other than the one recommended in this manual.
Important information concerning the refrigerant used
This makes contains fluorinated greenhouse gases regulated by the Kyoto
protocol. Do not release these gases into the atmosphere.
Type of refrigerant: R32
Security unit: A2L
GWP(1) value: 675, based in the 4th report of the IPCC.
The quantity of refrigerant, based on the F-Gas regulation no. 517/2014, is
stated on the unit's rating plate.
Period checks for leaks of refrigerant may be required by European or local
legislation. Please contact your local dealer for more information.
(1) Global warming potential
3

Advertisement

Table of Contents
loading

Table of Contents