Page 1
CAUTION: Activate Knox eKey and Knox eLock Core prior to installation! The Knox eLock Core and the Knox eKey must be activated before installation of the Knox eLock Core. See the KnoxConnect Management System Administrator User Guide for further instructions.
Page 2
For illustration of part Return Lock Shell with the Lock Core and Mechanical Key to disassembly, see first page. Knox Company. Contact Technical Support for return instructions. 1601 W. DEER VALLEY RD. PHOENIX, AZ 85027 | 800-552-5669 | 623-687-2290 | TECHSUPPORT@KNOXBOX.COM | KNOXBOX.COM...
Page 3
Assemble the Knox eLock Core: Insert the Dust Cover, Dust Cover Install the Lock Shell Nut onto the Lock Shell Line up the sidebar of the Knox eLock Bracket, and the Knox eLock Shell into from the inside of the door. Ensure the TAB...
Page 4
Dust Cover. Lift the Dust Cover up and press both halves of the Knox RainGuard for a firm fit. This concludes the Knox eLock Core Retrofit Instructions. 1601 W. DEER VALLEY RD. PHOENIX, AZ 85027 | 800-552-5669 | 623-687-2290 | TECHSUPPORT@KNOXBOX.COM |...
Need help?
Do you have a question about the ELOCK CORE RETROFIT and is the answer not in the manual?
Questions and answers