Page 1
CAUTION: Activate Knox eKey and Knox eLock Core prior to installation! The Knox eLock Core and the Knox eKey must be activated before installation of the Knox eLock Core. See the KnoxConnect Management System Administrator User Guide for further instructions.
Page 2
Dust Cover Bracket will come off with the Lock Core and Mechanical Mechanical Lock Shell. Set them aside Key to Knox Company. for reuse with the new Knox eLock Shell. Contact Technical Support Newer 1650 models will also have a plastic for return instructions.
Page 3
Assemble the Knox eLock Core: Insert the Dust Cover, Dust Cover Install the Lock Shell Nut onto the Lock Line up the sidebar of the Knox eLock Bracket, and Knox eLock Shell into the Shell from the inside of the door. Ensure...
Page 4
Lastly, remove the adhesive backing from the Knox "K" reflective label, and place front and center of the Dust Cover. This concludes the Knox eLock Core Retrofit Instructions. 1601 W. DEER VALLEY RD. PHOENIX, AZ 85027 | 800-552-5669 | 623-687-2290 | TECHSUPPORT@KNOXBOX.COM | KNOXBOX.COM...
Need help?
Do you have a question about the KLS-3200 and is the answer not in the manual?
Questions and answers