Table of Contents
Advertisement
fire bowl
body (1 pc)
Assembly
1. Carefully unpack all parts from the box, compare parts with package content listed above,
make sure all parts are present before beginning assembly of product. If any part is missing
or damaged, do not attempt to assemble the product. Call customer service.
2. Place the fuel can into the fire bowl body carefully, make the fuel can levelered (See Figure
1).
3. Put the glass beads evenly onto fire bowl (See Figure 2).
glass beads
Before lighting the fire bowl
The fuel can is empty, it is recommended to fill bio-ethanol into the can on the initial use. After
the fuel is used up, the fuel can be filled or refueled with bio-ethanol or gel fuel after it is
cooled COMPLETELY.
NOTE: DO NOT exceed the "max" volume level while refueling the fuel can (see Figure 3).
Package Contents
fuel can (1 set)
fire bowl
extinguishing
glass beads
cover (1 pc)
(0.55 lbs)
Figure 1
Figure 2
Figure 3
2
can opener (1 pc)
max
Advertisement
Table of Contents
Need help?
Do you have a question about the 820-303V00 and is the answer not in the manual?
Questions and answers