Related Manuals for HOMCOM YH-2001
Summary of Contents for HOMCOM YH-2001
- Page 1 IN230500360V01_US 820-354V80 Electric Fireplace Heater Model Voltage Frequency Power YH-2001 120V~ 60Hz 1500W IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY MANUAL INSTRUCTION...
- Page 2 Features of the product: This is an emulational flame electric fireplace. The theory of the product is to use a fan to flow the hot air heated by the heating elements in order to achieve the effect of indoor heating. Scope of delivery Immediately after unpacking please check that the delivery is complete and all product parts are in good condition.
- Page 3 12. Do not insert or allow foreign objects to enter ventilation or exhaust openings, as this may cause an electric shock or fire, or damage the heater. 13. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- Page 4 TOOLS NEEDED FOR ASSEMBLY. Phillips ("+") screwdriver (not included) PARTS AND HARDWARE Item Description Qty Stove Legs Screws ASSEMBLY ALWAYS make sure the unit is unplugged before beginning assembly! NEVER move or clean the heater, or change the bulbs, while it is plugged in.
- Page 5 1) Carefully turn the STOVE (A) upside down and lay it on a clean soft surface. 2) Insert the TAB of one LEG (B) into the SLOT in the corner of the stove frame. 3) Thread two SCREWS (C) through the holes in the leg and into the stove frame. Partially tighten the screws with a Phillips screwdriver.
- Page 6 Control Panel Functions CONTROL OPERATION/FUNCTION ON: Press the power switch ON. The power indicator light will glow, and the flame effect will turn on. OFF: Press the power switch OFF. All functions will turn off. ON/OFF FLAME INTENSITY: This knob controls the brightness of the flame effect.
- Page 7 Overheating safe device If the heater stops working, turn the heater off and inspect the blockage of inlet or outlet. Disconnect the plug and wait at least 10 minutes for the protection system to reset before attempting to restart the heater. If the safe device still switches the heater off and makes the heater fail to operate, take the heater to your nearest service center for examination or repair.
Need help?
Do you have a question about the YH-2001 and is the answer not in the manual?
Questions and answers